Abstract:Organometal trihalide perovskites are emerging as a new generation of photovoltaic materials. They are abundant in nature and have rapidly increasing power conversion efficiencies (PCE) of above 15% in common hybrid (mixed organic/inorganic) thin-film-based solar cells.1–3 Up to now, perovskite films have been formed by film deposition approaches such as spin-coating, sequential deposition of the inorganic and organic precursor, and co-evaporation of the precursors.1, 2 Low-temperature solution processes are among the simplest ways to fabricate planar low-cost photovoltaic devices. However, perovskite crystallizes very rapidly, so it is very challenging to form uniform, continuous, and leakage-free perovskite films by solution methods.2 We developed two simple and effective low-temperature solution processes to fabricate high-efficiency perovskite devices (see Figure 1). In the first approach, we studied the influence of the ratio of the precursors methylammonium iodide (CH3NH3I) and lead iodide (PbI2) in a premixed solution. 3 We found that using a non-stoichiometric precursor solution (i.e., not in a simple ratio) was critical to forming stoichiometric (i.e., in a simple ratio) perovskite films. The compositions of the spun perovskite films were very sensitive to the substrate surface, and could be very different from those of the precursor solutions. We varied the composition of the precursor solution, and found a PbI2/CH3NH3Xmolar ratio of 0.6–0.7 gave the best surfacemorphology and electronic properties, such as doping concentration. We used a planar heterojunction device structure of ITO/ PEDOT:PSS/(CH3NH3I)/PCBMor ICBA/C60/BCP/aluminum, where ITO is a substrate of indium tin oxide, PEDOT:PSS is an electron-donating transparent conductive polymer, PCBM and ICBA are fullerene-derived electron acceptors, C60 is buckminsterfullerene (a spherical fullerene molecule), and BCP is 2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline, an electrontransporting but hole-blocking layer. Figure 1. Schematic of the prepation of perovskite films by (a) spin coating of pre-mixed precursor of lead iodide (PbI2) and methylammonium iodide (CH3NH3I) and (b) an interdiffusion approach. ITO: Indium tin oxide, a transparent conducting oxide. PEDOT:PSS: A transparent, conductive polymer. MAI: Methylammonium iodide. MAPbI3 Methylammonium lead iodide.

A Two-Step, All Solution Process for Conversion of Lead Sulfide to Methylammonium Lead Iodide Perovskite Thin Films

Reproducible One-Step Fabrication of Compact MAPbl(3-x)Cl(x) Thin Films Derived from Mixed-Lead-Halide Precursors

New Methylamine-Iodine-Mediated Solvent-Free Approach of Hybrid Perovskite Synthesis via the Redox Conversion of Metallic Lead Films

Impact of the Solvation State of Lead Iodide on Its Two‐Step Conversion to MAPbI3: an in Situ Investigation

Optimizing Methylammonium Lead Iodide Perovskite Synthesis for Solar Cells via Two-step Spin Coating with Mixed Solvents

The Role of Solvents in the Formation of Methylammonium Lead Triiodide Perovskite

Realization of a Highly Oriented MAPbBr(3) Perovskite Thin Film Via Ion Exchange for Ultrahigh Color Purity Green Light Emission

Complete Conversion of PbI2 to Methyl Ammonium PbI3 Improves Perovskite Solar Cell Efficiency

Single-step Chemical Vapor Deposition of Methyl Ammonium Lead Halide Perovskite for p-i-n Solar Cells

In Situ Investigation of the Growth of Methylammonium Lead Halide (mapbi3–xbrx) Perovskite from Microdroplets

Single‐Step Chemical Vapor Deposition of Methyl Ammonium Lead Halide Perovskite for p–i‐n Solar Cells

Low Pressure Vapor-assisted Solution Process for Tunable Band Gap Pinhole-free Methylammonium Lead Halide Perovskite Films

Preparation and Characterization of Organic Inorganic Hybrid MAPbI2Br Perovskite

A Feasible and Effective Post-Treatment Method for High-Quality CH3NH3PbI3 Films and High-Efficiency Perovskite Solar Cells

Tetrabutylammonium (TBA)-Doped Methylammonium Lead Iodide: High Quality and Stable Perovskite Thin Films

Preparing High-Efficiency Perovskite Solar Cells

Extracting ammonium halides by solvent from the hybrid perovskites with various dimensions to promote the crystallization of CsPbI3 perovskite

Direct In Situ Conversion of Lead Iodide to a Highly Oriented and Crystallized Perovskite Thin Film via Sequential Deposition for 23.48% Efficient and Stable Photovoltaic Devices

Replacing PbI2 by MAPbI(3) to Realize Large Grain Size and Reduced Hysteresis for Highly Efficient Perovskite Solar Cells

A Compact And Smooth Ch3nh3pbi3 Film: Investigation Of Solvent Sorts And Concentrations Of Ch3nh3i Towards Highly Efficient Perovskite Solar Cells