Abstract:Current design procedures for complicated three-dimensional structural components with component interactions may not necessarily result in optimum designs. The wrist pin end design of the connecting rod with an interference fit is governed by the stress singularity in the region where the wrist pin breaks contact with the connecting rod. Similar problems occur in a wide variety of structural components which involve interference fits. For a better understanding of the problems associated with obtaining optimum designs for this important class of structural interaction only the design problems associated with the wrist pin end of the rod are addressed in this study. This paper demonstrates a procedure for designing a functional and minimum weight wrist pin end of an automobile engine connecting rod with an interference fit wrist pin. Current procedures for Finite Element Method (FEM) model generation in complicated three-dimensional components are very time consuming especially in the presence of stress singularities. Furthermore the iterative nature of the design process makes the process of developing an optimum design very expensive. This design procedure uses a generic modeler to generate the FEM model based on the values of the design variables. It uses the NASTRAN finite element program for structural analysis. A stress concentration factor approach is used to obtain realistic stresses in the region of the stress singularity. For optimization, the approximate optimization strategy in the COPES/CONMIN program is used to generate an approximate design surface, determine the design sensitivities for constrained function minimization and obtain the optimum design. This proposed design strategy is fully automated and requires only an initial design to generate the optimum design. It does not require analysis code modifications to compute the design sensitivities and requires very few costly NASTRAN analyses. The connecting rod design problem was solved as an eight design variable problem with five constraints. A weight reduction of nearly 27 percent was achieved over an existing design and required only thirteen NASTRAN analyses. It is felt that this design strategy can be effectively used in an engineering environment to generate optimum designs of complicated three-dimensional components.

Lightweight Design of an Outer Tie Rod Using Meta-Model Based Optimization Technique

Lightweight design of aircraft truss based on topology and size optimization

Optimization Analysis of Automobile Tie Rod using FEA and Experimental Approach

Lightweight steering equipment based on prestressed modal analysis

Optimization design of titanium alloy connecting rod based on structural topology optimization

Metamodel-based Lightweight Design of an Automotive Front-Body Structure Using Robust Optimization

Multi-Objective Lightweight Optimization of Parameterized Suspension Components Based on NSGA-II Algorithm Coupling with Surrogate Model

Optimal Design of Steering Tie Rods in Passenger Cars

Billet Optimization for Steering Knuckle Using Taguchi Methodology

Lightweight Design of Forklift Frame Based on Guide Weight Method

Optimization of the Wrist Pin End of an Automobile Engine Connecting Rod With an Interference Fit

Multi-objective optimization design of anti-roll torsion bar using improved beluga whale optimization algorithm

Optimization of Baja Racing Car Frame Based on GA/MOGA/SA Algorithm and Experimental Research on Bending-torsional Stiffness of Frame

Topology optimization-based lightweight design of a certain tubular beam subframe

Optimal Design of Automobile Connecting Rod Basic on Finite Element

Lightweight design of an automotive lower control arm using topology optimization for forming process

Optimum structural design of the lower control arm using meta-heuristic algorithms

Lightweight design of a steering power cylinder bracket

Structure Optimization of Semi-Solid Die Cast Steering Knuckle and its Experiment Verification

Analysis and optimization of the front subframe of vehicle