Abstract:Possessing the advantages of both polymeric membranes and the specific inorganic nanoparticles or nanotubes, mixed matrix membranes (MMMs) have captured the imagination of researchers for a possible technological breakthrough for efficient gas separation. However, it is still very challenging to achieve defect-free interface between fillers and polymer matrix. In this study, the naturally abundant and low cost halloysite nanotubes (HNTs) were applied as fillers for MMMs synthesis. To improve the filler dispersion and filler-matrix interface affinity, the raw HNTs were modified by either alkali etching or (3-Aminopropyl) triethoxysilane grafting. After surface etching, the defect holes were formed on the surfaces of etched-HNTs, resulting in the rougher HNT walls and significant increment of surface area and CO2 adsorption capacity. The filler/polymer interfacial voids and filler dispersion were quantitatively assessed by tomographic focused ion beam scanning electron microscopy. HNTs surface etching significantly improved the HNTs/polymer interfacial affinity (void% = 0.06% for Raw-HNTs MMM, 0.02% for Etched HNTs MMMs) and filler dispersion, while grafted-HNTs mainly contribute to the filler dispersion. Compared to the pure polymer membrane and MMMs with untreated HNTs, MMMs containing 10 wt.% etched HNTs filler exhibited both increased CO2 permeability (807.7 Barrer) and higher CO2 selectivity (CO2/CH4 selectivity of 27.8) on the well-known limit of Robeson upper bound. In contrast, grafting HNTs only increased the membrane permeability without enhancing CO2 selectivity. The results suggest that surface etching can be an effective route in filler modification to improve interfacial morphology and membrane separation performance. (C) 2016 Elsevier B.V. All rights reserved.

New Approach for Activation of N2-Selective ETS-4 Membrane for Nitrogen Separation from N2/CH4 Mixture

A High‐Performance N2‐Selective MXene Membrane with Double Selectivity Mechanism for N2/CH4 Separation

Separating nitrogen/methane on zeolite-like molecular sieves

Vacuum treated amorphous MOF mixed matrix membrane for methane/nitrogen separation

Enhanced gas separation performance for H 2 purification using MIL-68(ln)-nh 2 /PES mixed-matrix membranes

Precise pore size modulation of K-MER zeolites for N2 trapping

Understanding the performance of RHO type zeolite membrane for CH4/N2 separation based on molecular dynamics and deep neural network methods

CARBON DIOXIDE/METHANE SEPARATION PERFORMANCE BY MIXED MATRIX MEMBRANE FROM POLYSULFONE/ HALLOYSITE NANOTUBES

Innovative strategies for enhancing gas separation: Ionic liquid-coated PES membranes for improved CO 2 /N 2 selectivity and permeance

High performance of PES-GNs MMMs for gas separation and selectivity

Synthesis of Porous, Nitrogen-Doped Adsorption/Diffusion Carbonaceous Membranes for Efficient CO2Separation

Large‐area vacuum‐treated ZIF‐8 mixed‐matrix membrane for highly efficient methane/nitrogen separation

Nitrogen rejection in natural gas using NaZSM-25 zeolite

Carbon nanofibers with gas selective layer containing rich and accessible ultramicropores for methane/nitrogen separation

Separation of nitrogen from methane by multi-stage membrane processes: Modeling, simulation, and cost estimation

AlPO-18 Membranes for CO2/CH4 and N2/CH4 Separations

Fabrication of Mixed Matrix Membranes with Zinc Ion Loaded Titanium Dioxide for Improved CO2 Separation

Synthesis and performance of STT zeolite membranes for He/N2 and He/CH4 separation

New Tricks for Old Molecules: Development and Application of Porous N-doped, Carbonaceous Membranes for CO2 Separation.

Adsorptive separation studies of ethane-methane and methane-nitrogen systems using mesoporous carbon.

Surface-Etched Halloysite Nanotubes in Mixed Matrix Membranes for Efficient Gas Separation