Abstract:The Daniudi gas field is located in the Ordos Basin's northern section of the Yishan slope. The intertidal–subtidal depositional environment dominates the lithology of the Ma55 sub-member, resulting in a stable, thick-layered dark gray–gray–black limestone and lime dolomite. The stratum is stable laterally as well as dolomite, with an average thickness of 26.8 m. Fractures, dissolution expansion pores, and inter-crystalline dissolved pores are the primary reservoir space kinds, with a minor number of karst caves and fractures generated as well. The main distribution ranges for porosity and permeability are 1–8 percent and 0.01–1 mD, respectively. Low porosity, tightness, and ultra-low permeability are common characteristics, and a single well typically has no natural productivity. Production stimulation technologies like pre-fluid acid fracturing, compound sand addition acid fracturing, and multi-stage injection + temporary plugging volumetric acid fracturing have been gradually optimized using the horizontal well development method, and breakthroughs in the development of tight and low-permeability carbonate rock reservoirs have been made. However, the conditions of different types of reservoirs are quite different, and the acid fracturing process is not matched and imperfect, resulting in large differences in the productivity of different horizontal wells after fracturing, as well as a high proportion of low-yield wells, which cannot meet the needs of cost-effective and effective development of this type of gas reservoir. In light of the aforementioned issues, a series of laboratory tests have been carried out to explore the stimulation effects of acid fracturing on different types of reservoirs and to optimize the acid fracturing process in the Daniudi gas field. The results show that the rock mechanical performances and the acid etching conductivities of the rock specimens are related to the types of reservoirs. The rock mechanical properties can be deteriorated after acidizing, but different types of reservoirs have different degrees of deterioration. According to the results of acid etching conductivity of different types of reservoirs, conductivities obtained by high and low viscosity and cross-link-gelled acid (two stage injection) processes are higher than those of high viscosity systems. The experimental results of process suitability suggest adopting high and low viscidity acid systems for pore type and fracture-dissolved pore type reservoirs, and cross-linked acid systems for fracture-pore type reservoirs. The findings of this study can help form a better understanding of the performance of different types of reservoirs under the various acidified conditions that can be used for the optimization of acid fracturing processes in carbonate formations.

Influencing factors of viscoelastic surfactant diverting acid: a review

Diverting Mechanism of Viscoelastic Surfactant-Based Self-Diverting Acid and Its Simulation

Diversion Conditions for Viscoelastic-Surfactant-Based Self-Diversion Acid in Carbonate Acidizing

Numerical simulation: Diverting study and analysis on nanoparticle-viscoelastic-surfactant acid in high-temperature carbonate reservoir

Study on the Diverting Characteristics of Diverting Acid Based on Digital Rock Physics

A comprehensive method for acid diversion performance evaluation in strongly heterogeneous carbonate reservoirs stimulation using CT

An Innovative Acid Diversion Using In-Situ Foam Generation: Experimental and Successful Field Application

A comprehensive analysis of carbonate matrix acidizing using viscoelastic diverting acid system in a gas field

Modeling and optimizing the design of matrix treatments in carbonate reservoirs with self-diverting acid systems

Simulation and analysis of wormhole propagation by VES acid in carbonate acidizing

Synthesis and Characterization of Surfactant for Retarding Acid–Rock Reaction Rate in Acid Fracturing

Experimental Study on the Diversion Characteristic of a Viscous Fluid in a Heterogeneous Reservoir

Acid System and Stimulation Efficiency of Multistage Acid Fracturing in Porous Carbonate Reservoirs

Research progress of viscoelastic surfactant solutions applied to hydraulic fracturing and matrix acidizing

Organic Acid-Enhanced Viscoelastic Surfactant and Its Application in Fracturing Fluids

Dynamic Diverter Technology Efficiency in Acid Fracturing Applications

Novel Trends in the Development of Surfactant-Based Hydraulic Fracturing Fluids: A Review

Study on the Cleanup Mechanism of Microemulsion Acid Based on Microfluidic Experiment

Optimization of Acid Fracturing Process for Carbonate Reservoirs in Daniudi Gas Field

A robust viscoelastic surfactant tolerating 20% HCl up to 150 °C for oil well stimulation

Molecular Dynamics Simulation of the Viscosity Enhancement Mechanism of P-n Series Vinyl Acetate Polymer–CO2