Abstract:Sisal fibers were extracted and treated in alkali solutions of varying pH concentrations to alter their physical properties for the study. The study explores the effect of the pH concentrations on the internal microstructure using computed tomography, the changes in fibers surface topography using laser confocal microscopy, and how the mechanical properties are affected regarding their surface topography and internal microstructure. The X-ray microscopy scans showed that the untreated fibers are hollow throughout their length, and when treated, these voids collapse and reduce the fibers' diameter. Moreover, this also showed that treatment affects the complete structure of the fiber. Where a pronounced degradation was observed at 25%. This also affects the overall fibers' surface topography and mechanical properties. Where optimal mechanical properties were reported at 1% alkali treatment, this is evidently supported by the change in surface topology at this concentration. This means optimal properties may be achieved at the alkali concentration range below 1% and not necessarily at higher concentrations. 在不同pH浓度的碱溶液中提取和处理剑麻纤维,以改变其物理性质,用于研究. 该研究使用计算机断层扫描探讨了pH浓度对内部微观结构的影响,使用激光共聚焦显微镜探讨了纤维表面形貌的变化,以及纤维表面形貌和内部微观结构对机械性能的影响. x射线显微镜扫描显示,未处理的纤维在整个长度上都是中空的,当处理时,这些空隙会坍塌并减小纤维的直径. 此外,这也表明处理会影响纤维的完整结构。在25%时观察到明显的降解. 这也会影响整个纤维的表面形貌和机械性能. 据报道,在1%的碱处理下获得了最佳机械性能,这显然得到了该浓度下表面拓扑结构变化的支持. 这意味着在低于1%的碱浓度范围内可以实现最佳性能,而不一定在更高的浓度下.

Impact of alkali treatment with varying soaking times on the physico-chemical, tensile, and morphological properties of Smilax zeylanica plant fibers

The Effects of NaOH-Urea Aqueous Solution on the Strength and Softness Properties of Bamboo Ligno-cellulosic Fibers

Role of Alkali Treatment on Mechanical and Thermal Properties of Bamboo Particles Reinforced Polyvinylchloride Composites

Characterization of alkali-treated cellulosic fibers derived from Calamus tenuis canes as a potential reinforcement for polymer composites

Properties of Xanthoceras Sorbifolia Husk Fibers with Chemical Treatment for Applications in Polymer Composites

Impact of NaOH Treatment on the Chemical, Structural, Physico-mechanical, and Thermal Characteristics of Jute Species

Alkali treatment of lignocellulosic fibers extracted from sugarcane bagasse: Composition, structure, properties

Analysis of the characterization of NaOH-treated natural cellulose fibre extracted from banyan aerial roots

Investigation of mechanical, thermal, and chemical properties of raw and NaOH-treated bagasse/halfa grass/coir fiber

Effect of alkali treatment on new lignocellulosic fibres from the stem of the Aster squamatus plant

Alkali induced changes in spatial distribution of functional groups in carboxymethylated cellulose

Evaluation of chemical treatments to tensile properties of cellulosic bamboo fibers

Effect of Alkaline Treatment on Mechanical and Thermal Properties of Miswak (Salvadora persica) Fiber-Reinforced Polylactic Acid

Characterization and Properties of Alkali Treated Flax

Impact of Alkali Treatment on the Internal Microstructure, Surface Topography and the Resulting Mechanical Properties of Single Sisal Fibers

Influence of NaOH treatment on physical, chemical, thermal, and morphological behavior of aloe vera, banana, and corn husk fiber

Influence of chemical treatment on tensile strength, water absorption, surface morphology, and thermal analysis of areca sheath fibers

Characterisation of alkali-treated novel cellulosic fibres derived from Dombeya Buettneri plant as a potential reinforcement for polymer composites

Effect of alkali treatment on cotton/bamboo fibres for application as a reinforcement material

Characterization and optimization of alkali-treated yushania alpina bamboo fiber properties: case study of ethiopia species

Characterization of alkaline acid-treated fiber of Arundo donax L. from mature and immature plants: a comparative study