Abstract:Fill factor (FF) is a determining parameter for the power conversion efficiency (PCE) of organic solar cells (OSC). So far, nonfullerene (NF) OSCs with state-of-the-art PCEs exhibit FFs <0.8, lower than the values of Si or perovskite solar cells. The FFs directly display the dependence of photocurrent on bias, meaning that the competition between charge extraction and recombination is modulated by internal electric potential (Vin). Here, we report a study to understand key parameters/properties affecting the device FF based on seven groups of NF-OSCs consisting of widely used PBDBT-2F or PTB7-Th donors and representative NF-acceptors with FFs ranging from 0.60 to 0.78 and PCEs from 10.27 to 16.09%. We used field-dependent transient photocurrent measurements to reveal that fast and field-insensitive charge extraction at low Vin is an essential prerequisite for obtaining high FFs (0.75–0.8), which is enabled by balanced charge transport in steady and reduced bimolecular charge recombination in high purity phases. With bias-dependent quantum efficiency analysis, we further show that the recombination loss at low Vin in the devices with low FFs tends to be more significant involving excitons generated in the donor phase of blends. Our results provide relevance for how to improve the FF toward the boost of photovoltaic performance in NF-OSCs.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c09123?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c09123</a>.Calculation methods of physical parameters; energy level of materials; EQE spectra; normalized photocurrent decay kinetics; τext versus FF characteristics; TPC and TPV measurements; dark J–V characteristics of single-carrier devices; illumination-dependent open-circuit curves; AFM images; and bias-dependent EQE spectra (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c09123/suppl_file/am0c09123_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Modulating the deep-level defects and charge extraction for efficient perovskite solar cells with high fill factor over 86%

Depth-dependent defect manipulation in perovskites for high-performance solar cells

Modulating Vacancy-Related Defects and Hole Extraction Via a Multifunctional Additive for High-Performance Perovskite Solar Cells

Defect Passivation and Electrical Conductivity Enhancement in Perovskite Solar Cells Using Functionalized Graphene Quantum Dots

Achieving High Fill Factor in Organic Photovoltaic Cells by Tuning Molecular Electrostatic Potential Fluctuation

Interfacial Passivation Engineering for Highly Efficient Perovskite Solar Cells with a Fill Factor over 83

Regulating Charge Carrier Extraction and Transport with Dual-interface Modification for Efficient Perovskite Solar Cells

Highly Efficient and Stable Planar Perovskite Solar Cells with Modulated Diffusion Passivation Toward High Power Conversion Efficiency and Ultrahigh Fill Factor

Li, Ag Co‐Doping Enables Efficient Kesterite Solar Cell with a High Fill Factor of 74.30%

Synchronous Modulation of Defects and Buried Interfaces for Highly Efficient Inverted Perovskite Solar Cells

Insight into structure defects in high-performance perovskite solar cells

Fluorinated interfacial layers in perovskite solar cells: efficient enhancement of the fill factor

Monolithically-grained perovskite solar cell with Mortise-Tenon structure for charge extraction balance

High-Fill-Factor Perovskite Solar Cells via Pseudohalide Salt Modification of the Substrate to Mitigate Nonradiative Recombination at the Interface

Fast Field-Insensitive Charge Extraction Enables High Fill Factors in Polymer Solar Cells

Reconfiguration of interfacial energy band structure for high-performance inverted structure perovskite solar cells

An ultrahigh 84.3% fill factor for efficient CH3NH3PbI3 P-i-N perovskite film solar cell

Deciphering the Reduced Loss in High Fill Factor Inverted Perovskite Solar Cells with Methoxy-Substituted Poly(Triarylamine) as the Hole Selective Contact

Controlled defects and enhanced electronic extraction in fluorine-incorporated zinc oxide for high-performance planar perovskite solar cells

Defect passivation using ultrathin PTAA layers for efficient and stable perovskite solar cells with a high fill factor and eliminated hysteresis

Grain Boundary Modification via F4TCNQ To Reduce Defects of Perovskite Solar Cells with Excellent Device Performance