Abstract:Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, Ahead of Print. In this work, Fe-2Cu-0.8C-CaF2 self-lubricating composites with calcium fluoride solid lubricant (3 □ 12 wt.%) were examined for their friction and wear at 5 and 10 m/s, at 500 °C. Addition of CaF2 decreased density and hardness of composites. During sliding, materials gained weight due to oxidation. Compared to the base matrix (Fe-2Cu-0.8C), composites showed lower weight gain and lower coefficient of friction. Increase in porosity with CaF2 content increased oxidation resulting in higher weight gain and increased friction due to wear debris abrasion. Increase in speed reduced weight gain due to higher material loss. Adhesion was the dominant wear mechanism in base matrix; delamination and wear debris abrasion in composites. Temperature rise at sliding surfaces was theoretically estimated. Increase in speed increased temperature, which reduced friction due to softening and shearing of solid lubricant. Composite with 3 wt.% CaF2 showed least surface damage and 6 wt.% showed lowest coefficient of friction, i.e., lower by 16% and 10% at 5, 10 m/s than base matrix. Tribological response of the composites to a broad range of applied parameters, viz. speed, load and temperature taken from earlier works and present work is briefly summarized. The study suggests the dominant role of CaF2 content and the wear debris in altering the tribological response. Further, the stability of the developed composites at high temperature and high load conditions was also established. The study suggests that the developed composites could serve high-load and high-temperature applications for heavy machinery such as bearings, shafts and gears.

Research on temperature field and friction wear of friction partner of composite synchronizer ring

Tribological Properties of Seals in Integrated Transmission of Vehicle

Simulation of the Friction Temperature Field for Disc Brake

Investigation of thermal behavior of a novel multi-conical friction pair during wet clutch's engagement based on finite difference method

Friction-Wear Characteristics of Carbon Fiber Reinforced Paper-Based Friction Materials under Different Working Conditions

Influence upon temperature field distribution with straight grooves parameters of clutch friction disk

High temperature tribological response of Fe-2Cu-0.8C-CaF2 self-lubricating composites at high speeds

Research on the dynamic performance of double-helical planetary gear transmission under friction and wear

Wear Mechanism and Three-phase Synergistic Effect of Self-mated SiC/Si/Graphite Composites in Unlubricated Sliding

Influence of concave-convex composite texture on the tribology and transmission performance of wet clutch couples

Investigation on tribological behaviour of copper-free composite friction material under dry sliding at high-temperature

Frictional temperature field and its relationship to the transition of wear mechanisms of steel 52100

Synergistic Enhancement of the High-Temperature Friction and Wear Behavior of PTFE Matrix Composites with the Addition of CF, PEEK, and TiC

Effect of temperature on the tribological properties of Polytetrafluoroethylene/Kevlar fabric/phenolic composites

Tribological Behavior and Wear Mechanism of Cu-SiO2 Sintered Composite under Different Sliding Speeds

Wear mechanism of Nomex/PTFE fiber reinforced composites

Sn-containing Si3N4-based composites for adaptive excellent friction and wear in a wide temperature range

Analysis of Friction and Wear Properties of Friction Ring Materials for Friction Rings under Mixed Lubrication

Testing and Analysis of Frictional Performance of Carbon Fiber/Metal Composite Materials

Fretting Friction and Wear Behavior of Polymer Composites

Tribological Behavior of Short Carbon Fiber or Hybrid with SiCp Reinforced Al Alloy Composites