Fabrication and Characterization of Mineral Hydrophilic Antifogging Film via Vacuum Evaporation Method

Shenyu Wei,Qi Zheng,Lei Wang,Cheng Peng,Xinglan Cui,Xiaokui Che,Wuyu Wang,Zeen Yu

DOI: https://doi.org/10.3390/coatings13040730

IF: 3.236

2023-04-04

Coatings

Abstract:Natural silicate minerals have a wide range of applications as green, non-toxic and low-cost materials. In this paper, hydrophilic anti-fog films of silicate minerals were generated via a vacuum evaporation coating method using natural feldspar minerals as raw material. Thermogravimetric analysis shows that the feldspar changes its structure during the coating process, which in turn changes the roughness of the film and improves the hydrophilicity of the film. The hydrophilicity, anti-fogging properties, optical properties and surface morphology of the films were characterized by contact angle measurements, the hydrothermal method, UV-VIS spectrophotometer and atomic force microscopy, respectively. The results show that the mineral films have excellent hydrophilicity. The best anti-fog effect was achieved at a minimum contact angle of 22.3° with water when the thickness of the film was 100 nm. The anti-fog effect gradually decreased with the increasing thickness of the film. The optical transmittance test showed that the film material had a negligible effect on the transmittance of the substrate. When the film thickness was 100 nm, the maximum optical transmittance was 92.2%. This is 4.5% higher than when the film was uncoated, which has a specific visual transmittance effect.

materials science, multidisciplinary,physics, applied, coatings & films

What problem does this paper attempt to address?

The paper attempts to address the issue of fogging on the surface of transparent materials when there is a change in ambient temperature. Specifically, the authors studied the preparation, characterization, and performance of water-based anti-fog films made from natural feldspar minerals using the vacuum evaporation coating method. The main objectives of the paper include:

1. **Preparation of green, non-toxic, and significant anti-fog coatings**: Utilizing natural feldspar minerals as raw materials, optimizing the coating process to produce films with excellent anti-fog performance.
2. **Study the effect of film thickness on anti-fog performance**: Investigating the changes in anti-fog effect, hydrophilicity, optical properties, and surface morphology through samples of films with different thicknesses.
3. **Explore the relationship between film surface roughness and hydrophilic anti-fog performance**: Detailed characterization of the film's performance using thermogravimetric analysis, contact angle measurement, UV-Vis spectrophotometer, and atomic force microscope.

Overall, the paper aims to develop an environmentally friendly anti-fog film based on natural minerals and systematically study its performance to address the issue of fogging on the surface of transparent materials.