Abstract:The study mainly investigates the effect of strain ratio on the multiaxial low cycle fatigue behaviour of 316L at 550 °C. The evolution of both axial and torsional stress amplitude is observed to go through three stages: cyclic hardening, softening and fracture. What's different is that the torsional loading experiences fewer cyclic hardening cycles compared to the axial loading. Regarding the interaction between axial and torsional stresses, it is observed that as the torsional strain increases, the axial deformation response presents a lower peak stress and a higher softening rate, while the torsional peak stress and softening rate hardly changes with the increase of axial strain amplitude. The fracture pattern is obtained through three-dimensional (3D) depth-of-field observation. It is discovered that as the strain ratio increases, the fracture pattern transits from tensile failure mode to shear failure mode. Furthermore, the orientation angle of the fracture surface increases and lies between the critical plane angle of maximum shear strain and maximum normal strain, indicating a mixed failure mode. Additionally, a comparison of nine representative critical plane models reveals that the energy-based models can better predict the multiaxial fatigue life influenced by the strain ratio. Finally, based on the analysis of deformation and failure mechanisms, a normal damage parameter weakening factor (NDWF) is introduced into the KBM-R model, and an improved normal stress component (INSC) is introduced into the Wu-R model. The two modified models well capture the impact of strain ratio and accurately predict the multiaxial fatigue life of both 316L and P92 steel.

Multiaxial fatigue evaluation of type 316L stainless steel based on critical plane and energy dissipation

A Modified Coffin-Manson Model for Ultra-Low Cycle Fatigue Fracture of Structural Steels Considering the Effect of Stress Triaxiality

New strain energy-based critical plane approach for multiaxial fatigue life prediction

Multiaxial Fatigue Life Evaluation Using Strain Energy -Based Critical Plane Approach

A New Critical Plane-Energy Model for Multiaxial Fatigue Life Prediction of Turbine Disc Alloys

Multiaxial fatigue life prediction for metals by means of an improved strain energy density-based critical plane criterion

Multiaxial Fatigue Analysis of Notched Components Using Combined Critical Plane and Critical Distance Approach

An improved critical plane-energy multiaxial fatigue life prediction model considering shear mean stress

The strain ratio-dependent multiaxial low cycle fatigue behaviour and life prediction of 316L stainless steel based on critical plane at elevated temperature

Fatigue Behaviors and Life Evaluation of AISI304 Stainless Steel under Non-Proportional Multiaxial Random Loading

Critical Plane–based Multiaxial Fatigue Life Prediction of Turbine Disk Alloys by Refining Normal Stress Sensitivity

Multiaxial Low Cycle Fatigue Behavior and Life Prediction of Wire Arc Additive Manufactured 308L Stainless Steel

Multiaxial high-cycle fatigue failure and life prediction based on critical plane method

MULTIAXIAL LOW CYCLE FATIGUE LIFE PREDICTION MODEL BASED ON PLASTIC ENERGY

Evaluation and Comparison of Critical Plane Criteria for Multiaxial Fatigue Analysis of Ductile and Brittle Materials

Multiaxial Fatigue Life Predictions of Additively Manufactured Metals Using a Hybrid of Linear Elastic Fracture Mechanics and a Critical Plane Approach

Multiaxial low cycle fatigue behavior and life prediction method of 316LN stainless steel at 550 °C

Toward Consistent Fatigue Crack Initiation Criteria for 304L Austenitic Stainless Steel under Multi-Axial Loads

Multiaxial Fatigue Life Prediction Based on Nonlinear Continuum Damage Mechanics and Critical Plane Method

Strain Energy-Based Multiaxial Fatigue Life Prediction under Normal/shear Stress Interaction

Multiaxial Fatigue Lifetime Estimation Based on New Equivalent Strain Energy Damage Model under Variable Amplitude Loading