Abstract:The classical lake internal phosphorus (P) pollution control using P-inactivating materials is typically carried out by reducing the release of soluble P from sediments to overlying water; however, particulate P loading through sediment resuspension could also cause internal P pollution for algae breeding. Therefore, based on lanthanum modified bentonite clay (Phoslock®) and drinking water treatment residues (DWTR), the effect of P inactivating materials on sediment resuspension and settlement were comprehensively investigated to assess the variations in particulate P pollution from sediment. Results showed that both materials could effectively control soluble P pollution from sediment, while both had limited effect on the supplement of particulate P to overlying water. The reason may be that hydrodynamic disturbance was the key factor regulating sediment resuspension and settlement. The disturbance induced the resuspension of different sized sediments, especially <8 μm fractions, while increasing disturbing intensities promoted resuspension of relatively larger sized sediments (e.g., <63 μm). Further analysis suggested that after resuspension and settlement, the efficiencies of reducing bioavailable P by Phoslock® in relatively large sized sediment fraction (e.g., <63 μm) were substantially less than those in relatively small sized sediment (<8 μm). Although the reducing efficacies of DWTR had limited changes in different sized sediments, the remaining bioavailable P were clearly higher in smaller sized sediments with DWTR. The different performances on bioavailable P reduction mainly resulted from the distributions of materials and original P in different sized sediments. These findings indicated the potential supplement of particulate P for algal growth during resuspension and settlement of sediments amended by P inactivating materials. Overall, understanding the sediment P bioavailability and hydraulic properties at different sizes and the lake hydrodynamic conditions is essential to develop appropriate methods to control lake internal P pollution.

Effects of different chemical agents on changes in sediment phosphorus composition and the response of sediment microbial community

Contrasting effects and mode of dredging and in situ adsorbent amendment for the control of sediment internal phosphorus loading in eutrophic lakes

Phosphorus immobilization/release behavior of lanthanum-modified bentonite amended sediment under the dual effects of pH and dissolved organic carbon

The combined effects of lanthanum-modified bentonite and Vallisneria spiralis on phosphorus, dissolved organic matter, and heavy metal(loid)s

Contrasting effects of a traditional material of polyaluminum chloride and an emerging material of lanthanum carbonate capping on sediment internal phosphorus immobilization

Combining lanthanum-modified bentonite and calcium peroxide to enhance phosphorus removal from lake sediments

Response of sediment phosphorus partitioning to lanthanum-modified clay amendment and porewater chemistry in a small eutrophic lake.

The effects of different doses of lanthanum-modified bentonite in combination with a submerged macrophyte ( Vallisneria denseserrulata ) on phosphorus inactivation and macrophyte growth: A mesocosm study

In situ control of internal nutrient loading and fluxes in the confluence area of an eutrophic lake with combined P inactivation agents and modified zeolite

High resolution investigation of pH on control of mobile and organic phosphorus and associated release kinetics following lanthanum modified bentonite (LMB) amendment at the water-sediment interface

Lake sediment treatment with aluminum, iron, calcium and nitrate additives to reduce phosphorus release

Behavior of iron and other heavy metals in passivated sediments and the coupling effect on phosphorus

First attempt for in situ capping with lanthanum modified bentonite (LMB) on the immobilization and transformation of organic phosphorus at the sediment-water interface

Use of Lanthanum/aluminum Co-Modified Granulated Attapulgite Clay As a Novel Phosphorus (P) Sorbent to Immobilize P and Stabilize Surface Sediment in Shallow Eutrophic Lakes

Response of sediment microbial communities to different levels of PAC contamination and exposure time

Four kinds of capping materials for controlling phosphorus and nitrogen release from contaminated sediment using a static simulation experiment

Composition of dissolved organic matter controls interactions with La and Al ions: Implications for phosphorus immobilization in eutrophic lakes

Effect of lanthanum modified bentonite capping on control of sediment phosphorus and tungsten release

Resuspension and settlement characteristics of lake sediments amended by phosphorus inactivating materials: Implications for environmental remediation

Efficiency and mechanism of controlling phosphorus release from sediment using a biological aluminum-based P-inactivation agent

Sediment phosphorus immobilization with the addition of calcium/aluminum and lanthanum/calcium/aluminum composite materials under wide ranges of pH and redox conditions