Photostriction of Ferrites Under Visible Light
Xiu Li,Chen Chen,Faqiang Zhang,Hanliang Fang,Xintang Huang,Zhiguo Yi
DOI: https://doi.org/10.1021/acsaelm.1c00077
IF: 4.494
2021-05-20
ACS Applied Electronic Materials
Abstract:Developing photostrictive materials with wide visible light response and desirable photostriction strength remains a great challenge in view of practical applications. Ferrites with rich physical and chemical properties have great potential in this regard. Here, the photostrictive performances of three ferrite materials, CdFe<sub>2</sub>O<sub>4</sub>, CaFe<sub>2</sub>O<sub>4</sub>, and YFeO<sub>3</sub>, with different crystal structures are systematically investigated. A large photostriction around 0.1% with a decent photostrictive efficiency of ∼10<sup>–11</sup> m<sup>3</sup>/W is obtained for all the three ferrites under 405, 520, and 655 nm laser illumination. Further investigation reveals that the photothermal effect-induced expansion and the light-induced nonthermal part contribute almost equally to the measured shape deformation. In situ X-ray diffraction with external laser illumination in conjunction with the laser power-dependent Raman spectra analysis indicates that the strong photostriction is not a uniform deformation microscopically, which is closely related to the various degrees of response of the lattice planes to light and mainly attributed to the light-induced distortion of FeO<sub>6</sub> octahedrons. Further analysis suggests a bond length rule to account for both the difference between their photostrictive performances and the screening of materials.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaelm.1c00077?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaelm.1c00077</a>.Sample arrangement and illumination conditions for photostriction measurement; experimental and calculated XRD patterns; thermal expansion curves of CdFe<sub>2</sub>O<sub>4</sub>, CaFe<sub>2</sub>O<sub>4</sub>, and YFeO<sub>3</sub> bulk materials; comparison of photostrictive performances; stability and response time for the photostriction of CdFe<sub>2</sub>O<sub>4</sub>, CaFe<sub>2</sub>O<sub>4</sub>, and YFeO<sub>3</sub> bulk materials; reproducibility of the photostriction of CdFe<sub>2</sub>O<sub>4</sub>, CaFe<sub>2</sub>O<sub>4</sub>, and YFeO<sub>3</sub>; XRD patterns of CaFe<sub>2</sub>O<sub>4</sub>, CdFe<sub>2</sub>O<sub>4</sub>, and YFeO<sub>3</sub> bulk materials under different external laser irradiations; changes in 2θ and <i>d</i>-spacing of the selected diffraction peaks of CaFe<sub>2</sub>O<sub>4</sub>, CdFe<sub>2</sub>O<sub>4</sub>, and YFeO<sub>3</sub> bulk materials under different external laser irradiations; variations of the selected diffraction peaks of CaFe<sub>2</sub>O<sub>4</sub>, CdFe<sub>2</sub>O<sub>4</sub>, and YFeO<sub>3</sub> bulk materials collected at different temperatures; changes in 2θ and <i>d</i>-spacing of the selected diffraction peaks of CaFe<sub>2</sub>O<sub>4</sub>, CdFe<sub>2</sub>O<sub>4</sub>, and YFeO<sub>3</sub> bulk materials at different temperatures; Raman spectra collected at different temperatures; and changes of Raman peaks of CaFe<sub>2</sub>O<sub>4</sub>, CdFe<sub>2</sub>O<sub>4</sub>, and YFeO<sub>3</sub> with different laser powers and temperatures (<a class="ext-link" href="/doi/suppl/10.1021/acsaelm.1c00077/suppl_file/el1c00077_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.
materials science, multidisciplinary,engineering, electrical & electronic