Abstract:Cu2–xS has become one of the most promising thermoelectric materials for application in the middle-high temperature range. Its advantages include the abundance, low cost, and safety of its elements and a high performance at relatively elevated temperatures. However, stability issues limit its operation current and temperature, thus calling for the optimization of the material performance in the middle temperature range. Here, we present a synthetic protocol for large scale production of covellite CuS nanoparticles at ambient temperature and atmosphere, and using water as a solvent. The crystal phase and stoichiometry of the particles are afterward tuned through an annealing process at a moderate temperature under inert or reducing atmosphere. While annealing under argon results in Cu1.8S nanopowder with a rhombohedral crystal phase, annealing in an atmosphere containing hydrogen leads to tetragonal Cu1.96S. High temperature X-ray diffraction analysis shows the material annealed in argon to transform to the cubic phase at ca. 400 K, while the material annealed in the presence of hydrogen undergoes two phase transitions, first to hexagonal and then to the cubic structure. The annealing atmosphere, temperature, and time allow adjustment of the density of copper vacancies and thus tuning of the charge carrier concentration and material transport properties. In this direction, the material annealed under Ar is characterized by higher electrical conductivities but lower Seebeck coefficients than the material annealed in the presence of hydrogen. By optimizing the charge carrier concentration through the annealing time, Cu2–xS with record figures of merit in the middle temperature range, up to 1.41 at 710 K, is obtained. We finally demonstrate that this strategy, based on a low-cost and scalable solution synthesis process, is also suitable for the production of high performance Cu2–xS layers using high throughput and cost-effective printing technologies.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsnano.0c09866?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsnano.0c09866</a>.Additional characterization data including TEM, HRTEM, SEM, XRD, DSC, ICP, thermoelectric properties, and literature comparison (<a class="ext-link" href="/doi/suppl/10.1021/acsnano.0c09866/suppl_file/nn0c09866_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

High-Pressure Rapid Preparation of High-Performance Binary Silver Sulfide Thermoelectric Materials

General surfactant-free synthesis of binary silver chalcogenides with tuneable thermoelectric properties

In‐situ elemental reaction‐regulated Ag2S films enable the best thermoelectric performances

A Flash Vacuum‐Induced Reaction in Preparing High Performance Thermoelectric Cu 2 S

High Thermoelectric Performance of AgSb 1– x Pb x Se 2 Prepared by Fast Nonequilibrium Synthesis

Fast Preparation of AgxPb20SbTe20 (x = 0.5–3) Component with High Thermoelectric Performance

Facile Synthesis of Monodisperse Cu3SbSe4 Nanoparticles and Thermoelectric Performance of Cu3SbSe4 Nanoparticle-Based Materials

An effective synthesis route for high-performance α-MgAgSb thermoelectric material

Fabrication of Metal Sulfide Ag2S via Zone Melting Method and Evaluation of Its Thermoelectric Property

Metal Sulfide Ag2S: Fabrication via Zone Melting Method and Its Thermoelectric Property

Engineering of Thermoelectric Composites Based on Silver Selenide in Aqueous Solution and Ambient Temperature

Low-temperature sintering of Ag nanoparticles for high-performance thermoelectric module design

Ultra-low lattice thermal conductivity and enhanced thermoelectric performance in Ag2−xSe1/3S1/3Te1/3 via anion permutation and cation modulation

High Thermoelectric Performance of AgSb1-xPbxSe2 Prepared by Fast Non-Equilibrium Synthesis.

Stoichiometric manipulation to enhance the thermoelectric and mechanical performance of Ag2Se1+x

Ultra-Fast Synthesis for Ag2Se and CuAgSe Thermoelectric Materials

Combustion Synthesis: A Rapid Way for Preparing Bulk Cu2SnSe3 Thermoelectric Materials

High Pressure Synthesis and Electrical Properties of Ag;Pb;SbTe

Effect of the Annealing Atmosphere on Crystal Phase and Thermoelectric Properties of Copper Sulfide

Fast, Simple, and Cost‐Effective Fabrication of High‐Performance Thermoelectric Ag2Se through Low‐Temperature Hot‐Pressing

High Pressure Synthesis and Thermoelectric Performance of CoSbS1-xSex (x=0 similar to 0.3)