Abstract:One of the main challenges for the treatment of oily wastewater is emulsion separation. However, emulsions are generally more stable and difficult to separate. Herein, we report a facile strategy for the fabrication of monolithic oil/water separation materials by modifying melamine sponge with magnesium hydroxide (MH) coating, which can effectively separate immiscible oil/water mixtures and surfactant-stabilized emulsions. Its demulsification efficiency for the surfactant-stabilized emulsions can exceed 99.7%. In particular, the separation flux in a continuous emulsion separation system driven by a low-power pump can reach as high as 6.7 × 104 L m–2 h–1. MH particles coated on the surface of the sponge is one of the key factors for the formation of superhydrophobic surfaces and provide abundant adsorption sites for oil. Moreover, it was found that the surfactant added during the MH synthesis process not only affects the surface charge of MH but also interacts with the surfactant in the emulsion, which can promote instability and breaking of the oil/water interfacial film of emulsion.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.iecr.0c01276?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.iecr.0c01276</a>.Physical properties of the as-prepared samples (Table S1); schematic diagram of S-MH preparation (Figure S1); XRD patterns of as-prepared S-MH (Figure S2); FT-IR spectra of MH, SDBS, and S-MH (Figure S3); N2 adsorption–desorption isotherms and pore size distribution of S-MH (Figure S4); TEM images of (a) S-MH, (b) C-MH, and (c) MH (Figure S5); Effect of S-MH suspension concentration on water contact angle and sliding angle of S-MH/MS. (Figure S6); Effect of S-MH content in solution during synthesis on water contact angle of S-MH/MS S-MH/MS (Figure S7); separation of nonturbulent oil/water mixture and separation of turbulent oil/water mixture (Figure S8); photographs showing the preparation of emulsion (Figure S9); photographs showing the oil/water separation device (Figure S10); photographs showing the stability of surfactant-free emulsion (SF-E), CTAB-stabilized emulsion (CS-E) and SDS-stabilized emulsion (SS-E) (Figure S11); optical micrograph of surfactant-free emulsion (SF-E) and SDS-stabilized emulsion (SS-E) and histogram of the oil droplet size distribution in case of SF-E and SS-E (Figure S12); micrograph of the filtrate obtained by S-MH/MS separating SS-E and the particle distribution (Figure S13) (<a class="ext-link" href="/doi/suppl/10.1021/acs.iecr.0c01276/suppl_file/ie0c01276_si_001.pdf">PDF</a>)Process of S-MH/MS separating emulsion (CS-E) driven by gravity (<a class="ext-link" href="/doi/suppl/10.1021/acs.iecr.0c01276/suppl_file/ie0c01276_si_002.mp4">MP4</a>)Process of S-MH/MS separating emulsion driven by peristaltic pump (<a class="ext-link" href="/doi/suppl/10.1021/acs.iecr.0c01276/suppl_file/ie0c01276_si_003.mp4">MP4</a>)This article has not yet been cited by other publications.

Facile and scalable surface functionalization approach with small silane molecules for oil/water separation and demulsification of surfactant/asphaltenes-stabilized emulsions

Fabrication of a Novel Superhydrophobic and Superoleophilic Surface by One-Step Electrodeposition Method for Continuous Oil/water Separation

A FACILE WAY TO PREPARE A SPONGE/CELLULOSE FIBER COMPOSITE AND ITS APPLICATION IN OIL/WATER SEPARATION

A facile approach to silica-modified polysulfone microfiltration membranes for oil-in-water emulsion separation

Fabrication of Ph-Sensitive Superhydrophilic/Underwater Superoleophobic Poly(vinylidene Fluoride)-Graft-(sio2 Nanoparticles and PAMAM Dendrimers) Membranes for Oil-Water Separation.

Preparation of polystyrene and silane-modified nano-silica superhydrophobic and superoleophilic three-dimensional composite fiber membranes for efficient oil absorption and oil-water separation

Facile preparation of superhydrophobic melamine foam via one-pot emulsion polymerization for efficient oil/water separation

3D Superhydrophobic Sponge Coated with Magnesium Hydroxide for Effective Oil/Water Mixture and Emulsion Separation

Superhydrophobic Melamine–Formaldehyde Sponge Functionalized by Coupling Agent–Isocyanate Siloxane as Efficient Absorbents for Oil and Organic Solvents

Investigation of Oil-Water Separation on an F-SiO2/TiO2-Based Superhydrophobic/Superoleophilic Surface: Experiment Evaluation and MD Simulation.

Air superhydrophilic-superoleophobic SiO2-based coatings for recoverable oil/water separation mesh with high flux and mechanical stability

Simple Amphoteric Charge Strategy to Reinforce Superhydrophilic Polyvinylidene Fluoride Membrane for Highly Efficient Separation of Various Surfactant-Stabilized Oil-in-Water Emulsions

One-pot Mussel-Inspiration and Silication: A Platform for Constructing Oil-Repellent Surfaces Toward Crude Oil/water Separation

Simple preparation superhydrophobic melamine sponge via one-step emulsion polymerization for continuous oil/water separation in harsh environment

Constructing green superhydrophilic and superoleophobic COFs-MOFs hybrid-based membrane for efficiently emulsion separation and synchronous removal of microplastics, dyes, and pesticides

Investigation of Oil–Water Separation on an F-SiO 2 /TiO 2 -Based Superhydrophobic/Superoleophilic Surface: Experiment Evaluation and MD Simulation

Green, robust self-cleaning superhydrophilic coating and on-demand oil-water separation

Facile preparation of melamine foam with superhydrophobic performance and its system integration with prototype equipment for the clean-up of oil spills on water surface

Highly selective adsorption and biodegradation of emulsified oil by microorganisms embedded in SiO 2 hollow sphere bioreactor

Vapor-Liquid Sol-Gel Approach to Fabricating Highly Durable and Robust Superhydrophobic Polydimethylsiloxane@Silica Surface on Polyester Textile for Oil-Water Separation

Facile Approach in Fabricating Superhydrophobic and Superoleophilic Surface for Water and Oil Mixture Separation