Abstract:This paper presents characterization and compensation of the thermal bias drift of a MEMS accelerometer whose effective stiffness is electrostatically tuned to a low value with the help of the single-sided parallel plates (SSPPs) capacitors. A temperature drift model for the proposed accelerometer is built and the temperature effect on the mechanical stiffness and the circuit gains is characterized. The characterization reveals that the variations of the feedforward coefficient including the mechanical stiffness and the readout gain due to the temperature change play a significant role in the bias drift of output of the proposed closed-loop accelerometer. On the other hand, the variations of both feedback gain and tuning gain as a function of temperature are one-order-of-magnitude less than that of the feedforward coefficient. To calibrate the feedforward coefficient, an excitation signal as a form of AC reference displacement is introduced to drive the proof mass and the readout response is demodulated to calibrate the variance of the feedforward coefficient correspondingly. An open-loop compensation scheme for the temperature-induced bias drift using the variance of the calibrated response is proposed accordingly. Alternatively, the calibrated response can be controlled to a preset value by a new proportion integral derivative (PID) controller by the adjustment of the SSPP tuning voltage. The output of the PID controller is used for the calibration of the introduced bias from the electrostatic tuning force. Therefore, a closed-loop compensation of the thermal bias drift is achieved by remaining the feedforward coefficient while eliminating the calibrated bias. Experiments under a temperature cooling process and different tuning voltages are carried out to verify two proposed compensation schemes. The temperature drift coefficients (TDCs) of both compensated outputs exhibit at least one-order-of-magnitude reduction in response to the temperature change. When the effective stiffness of the accelerometer is tuned to about 4.19 N m(-1), the TDC of the compensated output using the proposed open-loop or closed-loop compensation schemes is reduced to about 0.1136 or 0.0391 mg degrees C-1, respectively and meanwhile, the Allan bias instability is slightly increased to 48.63 or 56.14 mu g, respectively.

Precision Positioning Based on Temperature Dependence Self-Sensing Magnetostrictive Actuation Mechanism

Theory and Experiment of Observer Based Magnetostrictive Self-Sensing Actuator

Conceptual design of self-sensing actuator based on giant magnetostrictive material

Precision Servo Control of GMA Based on Compounding Feedforward Compensation

Modelling Self-Sensing of A Magnetostrictive Actuator Based on A Terfenol-D Rod

The Design of Temperature Control System in Flexure Type Giant Magnetostrictive Actuator

Research on Control Method and Experiment for GMA's Precision Position Based on Predictive Model with Hysteresis

The Design of Temperature Control System in Giant Magnetostrictive Actuator

Modeling And Control Method Study Of Magnetostrictive Micropositioner And Its Application

Research on Methods of Thermal Error Compensating and Restraining in Giant Magnetostrictive Actuator

Self-sensing Principle of Magnetostrictive Actuator

Research on Methods of Thermal Distortion Compensation and Temperature Control in Giant Magnetostrictive Actuator

Sliding Mode Based Controller for Magnetostrictive Actuator

Research of Self-sensing Method Based on the Equivalent Circuit of Giant Magnetostrictive Actuator

The Research of Self-Sensing Magnetostrictive Actuator Based on Parameter Identification

Research on temperature controlling for GMA based on direct liquid cooling

Inverse model–based iterative learning control on hysteresis in giant magnetostrictive actuator

GMM Smart Component Temperature Rise Control System Design Based on Coupled Turbulent Flow Field and Temperature Field

Research on Cascade Control Strategy for Thermal Management System of Giant Magnetostrictive Actuator

Hysteresis Compensation of Giant Magnetostrictive Actuator Based on Jiles-Atherton Model

Characterization and Compensation of Thermal Bias Drift of a Stiffness-Tunable MEMS Accelerometer