The average equilibrium capillary pressure-saturation relationship in two-phase flow in porous media

S. Bottero,S. Hassanizadeh,C. Berentsen,S. Korteland,R. Helmig

Abstract:Two-phase flow is of importance in many natural and industrial porous media. It plays a role in many aspects of daily life, from environmental problems to industrial processes. Therefore, the correct description of two-phase flow in porous media is very important. For this correct description, constitutive relationships such as the capillary pressuresaturation relationship are needed. These constitutive relationships close the set of governing equations needed to describe two-phase flow in porous media. Commonly, the capillary pressure-saturation relationship is determined in the laboratory as it cannot be derived directly from physical considerations. The capillary pressuresaturation relationship obtained from such laboratory experiments is assumed to be an intrinsic property of the porous medium under consideration. Thus, it is assumed to be independent of the methods that were used to obtain it. The main aim of this thesis is to investigate whether this assumption is valid. First, the effect of upscaling the equilibrium capillary pressure-saturation curve from the local scale to the sample scale using averaging methods is investigated. This is done using a numerical simulation of a static primary drainage experiment in a homogeneous domain, including gravity. Several averaging methods are investigated, under which the intrinsic phase volume and simple phase averages, the centroid phase average, and the ' global' average. It is found that the used averaging method can have a significant effect on the obtained average capillary pressure-saturation curve, and that therefore care should be taken when averaging pressures, especially in the presence of gravity forces. In addition, it was shown that the use of pressures outside the sample to determine an average capillary pressure (global average) results in a fast increase in average capillary pressure at low wetting phase saturations. This is not observed when pressures inside the sample are used to obtain an average capillary pressure.

Engineering,Environmental Science,Chemistry