Abstract:In permafrost regions, rock engineering projects inevitably suffer from the effects of freeze-thaw (F-T) cycles under complex geographical and climatic conditions. Under F-T cycles, the damage and deterioration of macro- and microdefects, such as joints and cracks, in the rock will reduce the structural stability of the rock and even lead to frost damage in rock engineering. In this study, through indoor F-T cycle tests, uniaxial/triaxial compression tests, acoustic emission monitoring, and discrete element method (PFC 3D) modeling, the macro/microscopic mechanical characteristics and crack propagation behavior of sandstone-like samples with single cracks under F-T cycles were investigated. The results show that the compressive strength of sandstone-like samples with single cracks tends to decrease and then increase with an increasing crack angle and exhibits a stable decreasing trend with increasing F-T cycles, indicating a significant crack angle effect and F-T deterioration effect. Additionally, the confining pressure has an inhibiting effect on the F-T deterioration of samples, and there is a mutual inhibition relationship between the F-T deterioration effect and the crack angle effect. The characteristics of the acoustic emission signals during the loading process of sandstone-like samples with single cracks show good consistency with the stress-strain curves. The analysis of fracture mechanisms based on rise time/amplitude (RA) and average frequency (AF) is consistent with the macroscopic failure modes observed in the experiments. Moreover, with an increase in the number of F-T cycles, the number of tension cracks in the sandstone-like samples with single cracks increases, while the number of shear cracks decreases. The crack propagation behavior of sandstone-like samples with single cracks obtained through discrete element simulations (PFC 3D) is mainly divided into four stages: Stage I - initial calm stage, Stage II - crack initiation stage, Stage III - crack propagation stage, and Stage IV - failure stage. The simulated mechanical properties and failure modes agree well with the experimental results, and five crack propagation modes of sandstone-like samples with single cracks under F-T cycles were proposed: direct tension (DT), relative tension (RT), shear-tension (ST), direct shear (DS) and relative shear (RS).

Experimental study on effect of freeze-thaw cycles on dynamic mode-Ι fracture properties and microscopic damage evolution of sandstone

Energy evolution and macro-micro failure mechanisms of frozen weakly cemented sandstone under uniaxial cyclic loading and unloading

Tensile mechanical behavior and fracture characteristics of sandstone exposed to freeze-thaw treatment and dynamic loading

Influence of Microstructure on Dynamic Mechanical Behavior and Damage Evolution of Frozen-Thawed Sandstone Using Computed Tomography

Study on the microscopic damage evolution and dynamic fracture properties of sandstone under freeze-thaw cycles

Research on Deterioration Mechanism and Dynamic Triaxial Compression Characteristics of Freeze–Thaw Sandstone

Experimental and DEM simulations of the mechanical properties of rock under freeze–thaw cycles

Fracture mechanical properties of sandstone with pre-fabricated cracks under freeze–thaw cycles

Macroscopic and microscopic mechanical characteristics and crack propagation behavior of sandstone-like samples with single cracks under freeze-thaw cycles: Experimental and numerical simulation

Effect of freeze–thaw cycle on physical and mechanical properties and damage characteristics of sandstone

Damage mechanism of sandstones subject to cyclic freeze–thaw (FT) actions based on high-resolution computed tomography (CT)

Dynamic tensile mechanical properties of water-saturated and frozen sandstone after freeze-thaw fatigue damage treatment

NMR Pore Structure and Dynamic Characteristics of Sandstone Caused by Ambient Freeze-Thaw Action

Damage characteristics of sandstone pore structure under freeze-thaw cycles

Study on the Failure Process and Acoustic Emission Characteristics of Freeze–Thawed Sandstone under Cyclic Loading and Unloading

Fracture behavior of yellow sandstone under freeze–thaw cycles with varied saturation states: An investigation of mode I fracture

Pore structure expansion and evolution in sandstone with prefabricated crack under freeze-thaw cycles based on CT scanning

Deterioration of dynamic fracture characteristics, tensile strength and elastic modulus of tight sandstone under dry-wet cycles

Study on the pore structure characteristics and damage constitutive model of sandstone under freeze-thaw conditions

Study on Long-Term Dynamic Mechanical Properties and Degradation Law of Sandstone under Freeze-Thaw Cycle

Experimental Investigation on Fracture Behavior and Mechanical Properties of Red Sandstone Subjected to Freeze–Thaw Cycles