Abstract:The proposed two-dimensional geometrically exact beam element extends our previous work by including the effects of shear distortion, and also of distributed forces and moments acting along the beam. The general flexibility-based formulation exploits the kinematic equations combined with the inverted sectional equations and the integrated form of equilibrium equations. The resulting set of three first-order differential equations is discretized by finite differences and the boundary value problem is converted into an initial value problem using the shooting method. Due to the special structure of the governing equations, the scheme remains explicit even though the first derivatives are approximated by central differences, leading to high accuracy. The main advantage of the adopted approach is that the error can be efficiently reduced by refining the computational grid used for finite differences at the element level while keeping the number of global degrees of freedom low. The efficiency is also increased by dealing directly with the global centerline coordinates and sectional inclination with respect to global axes as the primary unknowns at the element level, thereby avoiding transformations between local and global coordinates. Two formulations of the sectional equations, referred to as the Reissner and Ziegler models, are presented and compared. In particular, stability of an axially loaded beam/column is investigated and the connections to the Haringx and Engesser stability theories are discussed. Both approaches are tested in a series of numerical examples, which illustrate (i) high accuracy with quadratic convergence when the spatial discretization is refined, (ii) easy modeling of variable stiffness along the element (such as rigid joint offsets), (iii) efficient and accurate characterization of the buckling and post-buckling behavior.

Cantilever Beam Equation for Almost Arbitrary Deflections: Derivation and Worked Examples

The Analytical Solutions for Orthotropic Cantilever Beams （I）： Subjected to Surface Forces

The analytical solutions for orthotropic cantilever beams (Ⅰ):Subjected to surface forces

The Analytical Solutions for Orthotropic Cantilever Beams (II): Solutions for Density Functionally Graded Beams

Analytical Solutions for Density Functionally Gradient Magneto-Electro-elastic Cantilever Beams

A Cantilevered Extensible Beam in Axial Flow: Semigroup Well-posedness and Post-flutter Regimes

Geometrical Nonlinearity for a Timoshenko Beam with Flexoelectricity

Equilibrium Configurations of Cantilever under Terminal Loads

Immersed boundary simulations of fluid shear-induced deformation of a cantilever beam

An explicit solution of the large deformation of a cantilever beam under point load at the free tip

Optimization Algorithm-Based Approach for Modelling Large Deflection of Cantilever Beam Subjected to Tip Load

Optimization algorithm-based approach for modeling large deflection of cantilever beam subject to tip load

Eigenvalues of an axially loaded cantilever beam with an eccentric end rigid body

Being gradually softened approach for solving large deflection of cantilever beam subjected to distributed and tip loads

A Comprehensive Elliptic Integral Solution to the Large Deflection Problems of Cantilever Beams in Compliant Mechanisms

Analytical Solution for Bending of a Piezoelectric Cantilever Beam under an End Load

Shear-flexible geometrically exact beam element based on finite differences

Analysis of Relaxation of Cantilever Beam Based on Euler-Bernoulli Equation

Large deflections and stability of spring-hinged cantilever beam

Dynamic Equations of Motion for Inextensible Beams and Plates

A semi-analytical simulation method for bi-directional functionally graded cantilever beams under arbitrary static loads