Abstract:As electrode materials for supercapacitors (SCs), hierarchical porous carbons (HPCs) have attracted tremendous attention due to their high specific surface area (SSA) and hierarchical pore structure. However, the complex template preparation process for HCPs usually brings high cost. Here, by combining the pre-carbonizing process of coal tar pitch (CTP) in eutectic salt (ZnCl2?NaCl, denoted as MZS, Sm260 ?C) with the KOH activating process, HPCs with high capacitive performance have been prepared. The pre-carbonizing process is carried out under atmosphere to obtain the primitive carbon (PC), during which the MZS will not only provide a liquid environment for catalytic cross-linking of CTP but also act as the porogen agent. The effects of temperatures, heating rates, the mass ratio of KOH to PC (mKOH/mC) and the activating temperatures on the structure and capacitive properties of HPCs are explored. The results show that the HPCs prepared by activating the optimal PC (prepared at 560 ?C in the MZS with a heating rate of 2.5 ?C min-1) at temperature of 800 ?C (heating rate of 10.0 ?C min-1 and mKOH/mC ratio of 5) exhibit high specific surface area (2984 m2 g-1), large total pore volume (2.2 cm3 g- 1) and wide pore size distribution. Based on the two-electrode test system, the optimal HCP shows a specific capacitance of 320 F g- 1, the symmetric cells exhibit an energy density of 10.6 Wh kg-1 at power density of 50.1 W kg- 1. Furthermore, the cell displays a good cyclic stability (the capacitance retention of 94.0% after 10,000 cycles). This strategy may be developed as a promising method for preparing high-performance HPC from CTP.

Heteroatom-doped hierarchical porous carbon via molten-salt method for supercapacitors

Soybean meal-derived heteroatoms-doped porous carbons for supercapacitor electrodes

Hydrangea-like N/O codoped porous carbons for high-energy supercapacitors

3D nitrogen and sulfur co-doped hierarchical porous carbon derived from mung bean jelly for high performance supercapacitors

N, S Co-doped hierarchical porous carbon rods derived from protic salt: Facile synthesis for high energy density supercapacitors

Facile synthesis of chitosan derived heteroatoms-doped hierarchical porous carbon for supercapacitors

Watermelon Peel‐Derived Heteroatom‐Doped Hierarchical Porous Carbon as a High‐Performance Electrode Material for Supercapacitors

Fabricating N, P-Codoped Hierarchical Porous Carbons from Lignin via Assembled Templating and Activation Strategy for High-Performance Supercapacitors

Synthesis and design of biomass-derived heteroatom-doped hierarchical porous carbon systems for high-voltage supercapacitors

A combination of heteroatom doping engineering assisted by molten salt and KOH activation to obtain N and O co-doped biomass porous carbon for high performance supercapacitors

Coal Tar Pitch-Based Hierarchical Porous Carbons Prepared in Molten Salt for Supercapacitors

From weed to N/O/S co-doped honeycomb-like porous carbon for high-performance supercapacitors: a facile and friendly one-step carbonization

Heteroatoms Doped Porous Carbon Derived from Waste Potato Peel for Supercapacitors

Multi-heteroatom-doped Hierarchical Porous Carbon Derived from Chestnut Shell with Superior Performance in Supercapacitors

Synthesis of hierarchically porous boron-doped carbon material with enhanced surface hydrophobicity and porosity for improved supercapacitor performance

Heteroatoms co-doped multi-level porous carbon as electrode material for supercapacitors with ultra-long cycle life and high energy density

Fabrication of N/O self-doped hierarchical porous carbons derived from modified coal tar pitch for high-performance supercapacitors

Molten Salt-Confined Construction of Nitrogen-Doped Hierarchical Porous Carbon for High-Performance Supercapacitors

Boosting capacitive performance of N, S co-doped hierarchical porous lignin-derived carbon via self-assembly assisted template-coupled activation

Heteroatoms-doped hierarchical porous carbon with multi-scale structure derived from petroleum asphalt for high-performance supercapacitors

Dual-Role Salt-Assisted Construction of Hierarchically Porous Carbon for Supercapacitors with High Energy and Power Density