Abstract:The selective catalytic reduction (SCR) technique that converts NOx from the outlet of industrial boilers at low temperature (<200 °C) requires catalysts that possess both the oxidization property of NOx and the adsorption ability to NH3. However, owing to unsuitable redox capacity, most NH3-SCR catalysts such as MnO2/TiO2 and MnO2–CeO2/TiO2 suffer from poor activity and N2 selectivity and SO2 poisoning. Benefiting from constructing mesoporous MnCeSmTiOx amorphous mixed oxides by the coprecipitation method, enhanced SO2-tolerant low-temperature NH3-SCR performance was achieved. The MnCeSmTiOx catalysts have an amorphous and mesoporous structure with a BET surface area of 214 m2·g–1. The NO conversion could reach nearly 100% at 140–320 °C and maintain >90% at 400 °C and a gas hourly space velocity of 80,000 h–1. The selectivity of N2 could be maintained at ≈100% at 100–320 °C and stay at >90% up to 400 °C. Besides, the MnCeSmTiOx catalyst preserves higher catalytic performance after introducing H2O and SO2 compared with the catalysts without adding Sm. The redox properties, acidic properties, and reaction intermediates of catalysts were analyzed by X-ray photoelectron spectroscopy, hydrogen temperature-programmed reduction, ammonia temperature-programmed desorption (NH3-TPD), O2-TPD, pyridine-IR, thermogravimetry–differential scanning calorimetry, and diffuse reflectance infrared Fourier transform. The synergistic effect of the Lewis acid sites and oxidation catalytic sites of mixed oxides serves for the conversion of NO to N2 by following the Langmuir–Hinshelwood mechanism. Doping Sm into MnCeSmTiOx can increase oxygen vacancies and transfer electrons to Mn4+ and Ce4+, which facilities the formation of active adsorbed NO2, bidentate nitrate, and bridging nitrate intermediates and suppresses SO2 poisoning by inhibiting the oxidation of SO2 by Mn4+ and Ce4+. Our work could be beneficial to modulate the redox capacity of active sites on NH3-SCR catalysts so that NOx can be eliminated in complex flue gas at low temperatures.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acscatal.0c02567?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acscatal.0c02567</a>.Experimental details, kinetic experiments and the calculation process of the reaction rate, reaction order, and TOF; XRD patterns; TEM images; and in situ DRIFTS spectra with adsorption of NH3 NO + O2 on MnSmTiOx and CeSmTiOx catalysts (<a class="ext-link" href="/doi/suppl/10.1021/acscatal.0c02567/suppl_file/cs0c02567_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Cerium-tungsten oxides supported on activated red mud for the selective catalytic reduction of NO

Investigation on the redox/acidic features of bimetallic MOF-derived CeMOx catalysts for low-temperature NH3-SCR of NOx

Cerium-tungsten oxides supported on activated red mud for the selective catalytic reduction of NOx

Modified red mud catalyst for the selective catalytic reduction of nitrogen oxides: Impact mechanism of cerium precursors on surface physicochemical properties

Alkali-resistant Catalytic Reduction of NO over CeO2-WO3/MCM-22 Supported Catalyst by Releasing Brønsted Acid Sites

A Superior Cerium-Tungsten Bimetal Oxide Catalyst with Flower-Like Structure for Selective Catalytic Reduction of NO by NH3

CeO2-WO3 catalysts for the selective catalytic reduction of NOx with NH3: effect of the amount of WO3

Revealing the effect of paired redox-acid sites on metal oxide catalysts for efficient NO removal by NH3-SCR

Synergy of vanadia and ceria in the reaction mechanism of low-temperature selective catalytic reduction of NOx by NH3

Improved Activity and SO 2 Resistance by Sm-Modulated Redox of MnCeSmTiO x Mesoporous Amorphous Oxides for Low-Temperature NH 3 -SCR of NO

Oxygen-vacancy mediated acidity and redox properties on WOx/Cu-doped CeO2 for the removal of NOx

Three-dimensionally ordered macroporous Ce-W-Nb oxide catalysts for selective catalytic reduction of NO with NH3

Cerium Oxide-Based Catalysts for Low-Temperature Selective Catalytic Reduction of NO x with NH 3 : A Review

CuOx and WOx modified CeO2-TiO2 with various morphologies for the selective catalytic reduction of NOx with NH3

Mechanistic Assessment of NO Oxidative Activation on Tungsten-Promoted Ceria Catalysts and Its Consequence for Low-Temperature NH3-SCR

Revealing the Effect of Paired Redox-Acid Sites on Metal Oxide Catalysts for Efficient NOx Removal by NH3-SCR.

Getting insight into the effect of CuO on red mud for the selective catalytic reduction of NO by NH3

Adjustment of operation temperature window of Mn-Ce oxide catalyst for the selective catalytic reduction of NOx with NH3

Activating low-temperature NH3-SCR catalyst by breaking the strong interface between acid and redox sites: A case of model Ce2(SO4)3-CeO2 study

Enhancement of activity and sulfur resistance of CeO2 supported on TiO2-SiO2 for the selective catalytic reduction of NO by NH3

CeO 2 –WO 3 Mixed Oxides for the Selective Catalytic Reduction of NO X by NH 3 over a Wide Temperature Range