Abstract:Water addition to aviation kerosene draws increasing attention in increasing heat sink and suppressing coke formation for regenerative cooling of scramjet engines. However, the effect of water on flow, reaction and heat transfer, particularly the thermal inhomogeneity in curved cooling channel is rarely reported. In the present study, the effect of water on coking and heat transfer inhomogeneity characteristics of China aviation kerosene, RP-3 studied in a uniformly heated curved mini-channel. A transient three-dimensional numerical simulation model with hybrid pyrolysis and steam reforming reactions of RP-3 is established and validated. The results show that there exists serious mass and thermal stratification in the curved mini-channel due to secondary flow and species diffusion. Specifically, RP-3 and water are diffused to concentrate at the bottom heating wall surface while coke deposition and light gaseous species, e.g., H 2 , CH 4 , CO are concentrated at the top heating wall surface. The thermal difference between the top and bottom heating walls is significant. Temperature and coke content of the top heating wall are much higher than those of the bottom heating wall. The gas film and coke deposition formed at the top heating wall surface lead to serious heat transfer deterioration. Therefore, the heat transfer coefficient at the bottom wall of the curved channel is much higher than that of the top wall. Water addition enhances secondary flow and thus exacerbates the coking and heat transfer inhomogeneity in the curved cooling channel. With water content increasing from 0 to 15 wt%, the secondary flow velocity increases by 288.2%, the conversion of RP-3 increases by 114.8% and the average coke content on the heating walls decreases by 40%. Meanwhile, the average heat transfer coefficient increases by 33.9% at the bottom heating wall but decreases by 18.0% at the top heating wall with the increase of water content.

Numerical Investigation of the Thermal Behavior of Cracked RP-3 in Rectangular Cooling Channels under Different Inclinations

Numerical Study of Fluid Flows and Heat Transfer of Aviation Kerosene with Consideration of Fuel Pyrolysis and Surface Coking at Supercritical Pressures

Modeling and Simulation of Supercritical-Pressure Turbulent Heat Transfer of Aviation Kerosene with Detailed Pyrolytic Chemical Reactions

Numerical Investigation of the Thermal-Mechanical Behaviors in the Regenerative Cooling Channel Considering Thermal Pyrolysis

Numerical Study on Thermal Cracking Process of Kerosene in a Rectangular Cooling Channel

Model Validation and Parametric Study of Fluid Flows and Heat Transfer of Aviation Kerosene with Endothermic Pyrolysis at Supercritical Pressure

Numerical investigation of pyrolysis and surface coking of hydrocarbon fuel in the regenerative cooling channel

Asymmetric Heating and Buoyancy Effects on Heat Transfer of Hydrocarbon Fuel in a Horizontal Square Channel at Supercritical Pressures

Conjugate Heat Transfer, Endothermic Fuel Pyrolysis and Surface Coking of Aviation Kerosene in Ribbed Tube at Supercritical Pressure

Experimental Study of Influence of Inlet Temperature on Aviation Kerosene Coking Characteristics

Numerical Study on Flow and Heat Transfer of Supercritical Hydrocarbon Fuel in Curved Cooling Channel

Large Eddy Simulations of Heat Transfer and Thermal Oxidative Coking of Aviation Kerosene in Vertical U-Tube at a Supercritical Pressure

Thermal Cracking and Heat Transfer of Hydrocarbon Fuels at Supercritical Pressures in Vertical Tubes

Effect of pyrolytic reaction of supercritical aviation kerosene RP-3 on heat and mass transfer in the near-wall region

Numerical Model Development and Validation for Hydrocarbon Fuel Supercritical Heat Transfer with Endothermic Pyrolysis

Numerical Investigations of Supersonic Combustion Characteristics of Thermally Cracked Fuels at Typical Pyrolysis Temperatures

Numerical Investigations on the Molecular Reaction Model for Thermal Cracking of n-Decane at Supercritical Pressures.

Numerical investigations on heat transfer of supercritical RP-3 flowing in circular tube

Supercritical Heat Transfer of Cryogenic-Propellant Methane in Rectangular Engine Cooling Channels

The effect of water on coking and heat transfer inhomogeneity of supercritical aviation kerosene in a curved mini-channel

Flow and heat transfer of supercritical RP-3 kerosene in an inclined rectangular channel heated on one side