Abstract:The inverted perovskite solar cells (PSCs) are gaining increasing attention recently for their unprecedented advantages, such as better integration with tandem and flexible designs, negligible hysteresis, good operational stability, and compatibility with commercially scalable fabrication approaches. Nickel oxide (NiOx) films prepared by magnetron sputtering technology exhibit excellent scalability and reproducibility, which could well meet the requirements of the large-scale production of inverted PSCs. However, NiOx prepared by vacuum methods generally has fewer surface hydroxyl groups, deteriorating the wettability and damaging the interface contact with the perovskite. Particularly, the Ni3+ defects on the NiOx surface could lead to unfavorable redox reactions with organic cations in the perovskite under high temperatures, promoting the rapid degradation of the perovskite. Thus, surface regulation of sputtered NiOx is imperative for high-performance PSCs. Herein, 4-(trifluoromethyl) phenylcarbamate hydrochloride (TFFA) was used to regulate the surface properties of sputtered NiOx. The strongly electronegative F ions in TFFA passivated the Ni3+ defects on the NiOx surface, suppressed unfavorable interface reactions, and improved charge recombination. The polar ammonium functional group was used to adjust the surface energy of NiOx, thereby improving the wettability and optimizing the crystallization kinetics of the perovskite. As a result, the power conversion efficiency (PCE) of PSCs reached 22.76%, which was among the highest PCEs reported for sputtered NiOx-based inverted PSCs to date. Moreover, the unencapsulated target devices exhibited better stability, maintaining over 85% of the initial PCE after aging for approximately 1200 h in a N2 environment. Our achievements pointed out a practical strategy for enhancing the performance of sputtered NiOx-based inverted PSCs, which could potentially accelerate the development and application of large-area PSCs.

Copolymer‐Templated Nickel Oxide for High‐Efficiency Mesoscopic Perovskite Solar Cells in Inverted Architecture

High-Performance Inverted Perovskite Solar Cells with Mesoporous NiO X Hole Transport Layer by Electrochemical Deposition.

Cation-size mismatch and interface stabilization for efficient NiOx-based inverted perovskite solar cells with 21.9% efficiency

Novel NiO Nanoforest Architecture for Efficient Inverted Mesoporous Perovskite Solar Cells.

Toward Efficient and Fully Scalable Sputtered NiOx‐Based Inverted Perovskite Solar Modules via Co‐Ordinated Modification Strategies

High‐performance and Large‐area Inverted Perovskite Solar Cells based on NiOx Films Enabled with A Novel Microstructure‐Control Technology

High‐Performance Inverted Perovskite Solar Cells with Sol–Gel‐Processed Sliver‐Doped NiOX Hole Transporting Layer

Linked Nickel Oxide/Perovskite Interface Passivation for High‐Performance Textured Monolithic Tandem Solar Cells

Overcome Low Intrinsic Conductivity of NiOx through Triazinyl Modification for Highly Efficient and Stable Inverted Perovskite Solar Cells

Thermally-stable and highly-efficient bi-layered NiOx-based inverted planar perovskite solar cells by employing a p-type organic semiconductor

Efficient NiOx Hole Transporting Layer Obtained by the Oxidation of Metal Nickel Film for Perovskite Solar Cells

Nickel oxide for inverted structure perovskite solar cells

Bilateral Chemical Linking at NiOx Buried Interface Enables Efficient and Stable Inverted Perovskite Solar Cells and Modules

Design of NiO<i><sub>x</sub></i>/Carbon Heterostructure Interlayer to Improve Hole Extraction Efficiency of Inverted Perovskite Solar Cells

Efficient Inverted Planar Perovskite Solar Cells Using Ultraviolet/Ozone‐Treated NiOx As the Hole Transport Layer

Performance Comparison between the Nanoporous NiO x Layer and NiO x Thin Film for Inverted Perovskite Solar Cells with Long-Term Stability

Potassium-Doped Nickel Oxide as the Hole Transport Layer for Efficient and Stable Inverted Perovskite Solar Cells

Rational Buried Interface Engineering of Inorganic NiO<sub><i>x</i></sub> Layer toward Efficient Inverted Perovskite Solar Cells

Quenching Detrimental Reactions and Boosting Hole Extraction via Multifunctional NiOx /Perovskite Interface Passivation for Efficient and Stable Inverted Solar Cells

Evaporated Nickel Oxide Films with Slow Annealing and Interface Modification for Perovskite Solar Cells

Surface Property Regulation of a Magnetron-Sputtered NiOx Hole Transport Layer for High-Performance Inverted Perovskite Solar Cells