Abstract:A promising high-strength Fe – 17.7Mn – 4.7Cr – 0.48C – 10Ni – 5Al – 4Cu wt.% Austenitic steel was solutionized, then aged for 3 or 10 h at 580°C producing a pronounced precipitation hardening response primarily due to the formation nanoscale NiAl precipitates. Density functional theory (DFT), molecular dynamics (MD), and discrete dislocation dynamics (DDD) calculations were combined with microstructural data from atom-probe tomography (APT), informing theoretical strengthening models to predict yield strength at different stages of precipitation as a function of NiAl size, volume fraction, and composition. These yield strength predictions were compared with experimental microhardness measurements of the various ageing conditions, including the peak microhardness of 490 HV, which corresponds to an estimated alloy yield strength of 1200 MPa. Comparing MD calculations with theoretical models showed that anti-phase boundary (APB) formation was the predominant barrier to dislocation motion posed by the NiAl precipitates. Using single dislocation particle strengthening models with NiAl APB energies calculated from DFT, good agreement was observed between DDD calculations and the 10 h peak-aged experimental measurements, while agreement with the 3 h experimental measurements required reducing the NiAl APB energy. These results demonstrate the utility of the undertaken approach integrating simulations and experiments across multiple length-scales, particularly the presented coarse-grained DDD simulation method towards modeling materials strengthened by very fine precipitates. The results further suggest that the observed NiAl precipitates may adopt an alternate crystal structure early in their formation.

Molecular dynamics simulation of Cr-N clusters formation in high nitrogen austenitic stainless steel

Research on the thermal plasticity of the 18Mn-18Cr-0.77N-2Mo high nitrogen austenitic stainless steel

Influences of Partial Substitution of C by N on the Microstructure and Mechanical Properties of 9cr18mo Martensitic Stainless Steel

Influence of Grain Boundary Carbides on Mechanical Properties of High Nitrogen Austenitic Stainless Steel

Martensitic Transformation Induced Planar Deformation of AlN Nanoprecipitates in High Nitrogen Stainless Steels

Optimization of Grain Boundary Character Distribution of Fe-19Cr-10Mn-1Ni-0.53N High Nitrogen Austenitic Stainless Steel

Enhancing yield strength of high nitrogen austenitic stainless steel

Characterization and Numerical Simulation of Nucleation–growth–coarsening Kinetics of Precipitates in G115 Martensitic Heat Resistance Steel During Long-Term Aging

Precipitation Behavior of the Second Phase in High-Nitrogen Austenitic Stainless Steel Alloyed with V and Nb

Effect of Interstitial Solutes on Precipitation Behavior of 9–12% Chromium Ferritic Steels

Atom probe tomography study of Cu precipitation behavior in 22Cr-13Ni-5Mn austenitic stainless steel

Hot Deformation Behavior and Processing Map of Cr–Mn–Ni–Mo–N Austenitic Stainless Steels

Numerical Simulation on Recrystallization of Coarse-Grained Austenite in Low-Carbon Nb-microalloyed Steel

Modeling of Strain-Induced Precipitation Kinetics and Evolution of Austenite Grains in Nb Microalloyed Steels

Process Design and Heat Treatment Research of A Nitrogen-containing Cr-Ni Type Austenitic Stainless Steel

Modelling and characterization of chi-phase grain boundary precipitation during aging of Fe–Cr–Ni–Mo stainless steel

Molecular dynamics simulation of intergranular fracture in austenitic steel containing precipitation

Study of the kinetics of austenite grain growth by dynamic Ti-rich and Nb-rich carbonitride dissolution in HSLA steel: In-situ observation and modeling

Effect of N–Cr Compounds on the Brazing of High Nitrogen Steel with Ag-based Filler Metal: First-Principles Calculation

Effect of nitrogen content on microstructure, mechanical properties, and corrosion behaviour of coarse-grained heat-affected zone of nitrogen-containing austenitic stainless steel

Predicting Yield Stress in a Nano-Precipitate Strengthened Austenitic Steel by Integrating Multi Length-Scale Simulations and Experiments