Abstract:Copper (Cu) is an important interconnect metal material in the semiconductor field. While removing excess copper in the chemical mechanical polishing process, it is necessary to add corrosion inhibitors to the slurry to protect copper from excessive corrosion. Numerous studies have shown that the heteroatoms and functional groups of corrosion inhibitors are crucial factors affecting their corrosion inhibition ability. The corrosion inhibition performance of benzimidazole (BI) and its two derivatives, 5-methyl benzimidazole (MBI) and 5-methyl benzotriazole (MBTA), on copper in glycine + N-methylglycine solution at pH 9 was studied, and their structure-activity relationship was revealed. Electrochemical measurements and adsorption isotherm fittings show that the three corrosion inhibitors cover the copper surface mainly through the chemisorption to prevent the anodic reaction of copper. The corrosion inhibition efficiencies of BI, MBI, and MBTA were 97.22%, 98.00% and 98.73% at the concentration of 8 mM, respectively, reaching their maximum values. The contact angle testing reveals that MBI and MBTA containing methyl groups are relatively more hydrophobic. X-ray photoelectron spectroscopy (XPS), atomic force microscope (AFM) and scanning electron microscope (SEM) results confirm that the three corrosion inhibitors were successfully adsorbed on the copper surface and formed a dense passivation film to protect the copper from corrosive solutions. In addition, a multi-module collaboration with density functional theory (DFT) and molecular dynamics (MD), further demonstrates that BI, MBI, and MBTA are all adsorbed on the copper layer in a mixed way, and MBTA has the strongest binding capacity to copper. The introduction of the methyl and N atom increased the adsorption area and attachment sites between the corrosion inhibitor and copper, which coincides with the experimental results.

Study on moisture-induced corrosion mechanism of copper wire bonding by thermodynamic calculation

Al-clad Cu Bond Wires for Power Electronics Packaging: Microstructure Evolution, Mechanical Performance, and Molecular Dynamics Simulation of Diffusion Behaviors

Non-continuous IMC in copper wirebonding: Key factor affecting the reliability

Copper Wire Bonding: A Review

Mechanical Issues of Cu-to-Cu Wire Bonding

Comparison and mechanism of electromigration reliability between Cu wire and Au wire bonding in molding state

Microstructural studies of Cu-Al Intermetallic Compound at Thermosonic Wire Bonding Interface

Corrosion-induced fracture of Cu-Al microelectronics interconnects

Factors influencing Al-Cu weld properties by intermetallic compound formation

Effects of high temperature and high humidity on the reliability of copper/epoxy bond

Theoretical investigation of energetics and mechanical properties of intermetallics in copper clad aluminum composite

Finite Element Analysis Of Influence Of Passivation Layer On Cu/Low-K Structure During Thermosonic Cu Wire Bonding

Effect of Metallic Materials Films on the Properties of Copper/Tin Micro-bump Thermo-compression Bonding

Effect of intermetallic on electromigration and atomic diffusion in Cu/SnAg 3.0Cu 0.5/Cu joints: Experimental and first-principles study

Corrosion inhibition effect of benzimidazole and two derivatives on copper in alkaline environments: experimental and theoretical analyses

Ultrasonic non-destructive evaluation study of molecular diffusion bonding of thin copper-aluminum electrode sheets

Construction of an n-Body Potential for Revealing the Atomic Mechanism for Direct Alloying of Immiscible Tungsten and Copper

Study on copper-to-copper bonding of three-dimensional integrated circuits using the quasicontinuum method

Effect of atomic diffusion on interfacial heat transfer and tensile property of copper/aluminum composites

An SEM-Based Finite Element Analysis of Cu-Ag Sintered Joints on Thermal Shock Reliability

Alloying mechanisms of binary immiscible systems based on tungsten-copper composite materials