Abstract:The single-well push-pull (SWPP) test has been widely used for several applications, including determination of transport parameters such as regional groundwater flux velocity, effective porosity and dispersivity. A complete SWPP test usually includes four phases of injection, chase, rest, and extraction, while previous models mostly ignore the chase phase for the sake of simplification. Actually, the chase phase is important to minimize the impact of well skins and wellbore storage on the shape of the breakthrough curves (BTCs), thus is necessary and should be included in the model. To this end, two simplified methods are proposed in this study based on two different time tp and ta during a four-phase SWPP test to estimate the parameters related to transport, where tp and ta correspond to the time of the peak concentration during the injection phase and the time when the center of tracer mass returns to the wellbore during the extraction phase, respectively. Specifically, the tp method can be used to estimate the regional groundwater flow velocity and dispersivity (transverse and longitudinal), while the ta method is used to estimate the regional groundwater flow velocity and the effective porosity. Finite-element numerical modeling of the SWPP test based on the coupling of two-dimensional transient groundwater flow and solute transport is employed to test the applicability of the proposed methods. Results indicate that both the tp and ta methods proposed in this study perform satisfactorily in estimation of regional groundwater flow velocity, effective porosity and dispersivity, and these two methods require fewer observations than traditional curve fitting methods and do not require any optimization algorithms. We have also compared the proposed two methods with several previous methods, and conclude that these two new methods generally perform better than those of previous studies in terms of parameter estimation reliability.

A low-cost model for slug tests in a confined aquifer with skin-zone effect

A Mathematical Model and its Semi-analytical Solution for the Flow of Anisotropic Confined Aquifer with Two Radial Layers Considering Heterogeneity of Well Skin

New Analytical Solutions for Constant Rate Pumping in Two‐Zone Double‐Porosity Confined Aquifer: A New Source Term Reflecting Effects of Well Skin and Wellbore Storage

An analytical model for a single‐well circulation system in a confined aquifer with a finite thickness well skin

Numerical Modeling of Slug Tests with MODFLOW Using Equivalent Well Blocks

Assessing the Hydraulic Conductivity Anisotropy and Skin-Effect Based on Data of Slug Tests in Partially Penetrating Wells

Analysis of slug tests in formations of high hydraulic conductivity

Modeling cross-hole slug tests in an unconfined aquifer

An analytic data analysis method for oscillatory slug tests

An analytical and meshless model for 3D transient flow in a confined aquifer with nonuniform thickness: Application to stream depletion due to groundwater extraction

Parameter Correlation Study on Two New Analytical Solutions for Radially Divergent Tracer Tests in Two-Zone Confined Aquifers with Vertical Dispersion Effect

Semi-analytical Solutions for Wellbores with Graded Skin Zones in Poroelastic Media

A Modified Wedge-Prism Model for Calculating the Limit Support Pressure of a Shallow Shield Tunnel Face in Unsaturated Sandy Soil

Advanced Analytical Model for Interpreting Oscillatory Pumping Tests With Wellbore Skin and Rate‐Dependent Skin Effects

A mathematical model and its solution for unsteady flow under siphon drainage by fully penetrating well in soft ground

2d Well-Balanced Positivity Preserving Shallow Flow Model With Wetting And Drying On Triangular Grids

A well-balanced positivity preserving two-dimensional shallow flow model with wetting and drying fronts over irregular topography

A three-dimensional numerical model for variably saturated groundwater flow using meshless weak-strong form method

A Multivariate Model of Deep Slurry Infiltration in Slurry Shield Tunneling

A novel four phase slug single-well push-pull test with regional flux:forward modeling and parameter estimation

A Multi-Layer SPH Method to Simulate Water-Soil Coupling Interaction-Based on a New Wall Boundary Model