Li4SiO4-Based Heat Carrier Derived from Different Silica Sources for Thermochemical Energy Storage

Xicheng Wang,Wentao Xia,Wenlong Xu,Zengqiao Chen,Xiaohan Ren,Yuandong Yang

DOI: https://doi.org/10.3390/en17092180

IF: 3.2

2024-05-03

Energies

Abstract:Thermochemical energy storage (TCES) is one of the key technologies facilitating the integration of renewable energy sources and mitigating the climate crisis. Recently, Li4SiO4 has been reported to be a promising heat carrier material for TCES applications, owing to its moderate operation temperature and stability. During the synthetic processes, the properties of the Si source used directly influence the performance of derived Li4SiO4 materials; however, the internal relations and effects are not yet clear. Hence, in this work, six kinds of SiO2 sources with different phases, morphology, particle size, and surface area were selected to synthesize a Li4SiO4-based TCES heat carrier. The physicochemical properties of the SiO2 and the corresponding derived Li4SiO4 were characterized, and the comprehensive performance (e.g., heat storage/releasing capacity, rate, and cyclic stability) of the Li4SiO4 samples was systematically tested. It was found that the silica microspheres (SPs), which possess an amorphous phase, uniform micro-scale structure, and small particle size, could generate Li4SiO4 TCES materials with a highest initial capacity of 777.7 kJ/kg at 720 °C/900 °C under pure CO2. As a result, the SP-L showed an excellent cumulative heat storage amount of 5.84 MJ/kg within 10 heat-releasing/storage cycles, which was nearly 1.5 times greater than the value of Li4SiO4 derived from commonly used silicon dioxide. Furthermore, the effects of the utilized Si source on the performance of as-prepared Li4SiO4 and corresponding mechanisms were discussed, which offers guidance for the future selection of Si sources to produce high-performance Li4SiO4-based TCES heat carriers.

energy & fuels

What problem does this paper attempt to address?

### Problems Addressed by the Paper

This paper primarily explores the impact of different sources of silicon dioxide (SiO₂) on the performance of lithium orthosilicate (Li₄SiO₄) thermochemical energy storage materials. Specifically:

1. **Importance of Thermochemical Energy Storage (TCES) Technology**:
- With the widespread application of renewable energy sources (such as solar and wind energy), their inherent intermittency and volatility pose challenges to modern power systems.
- Thermochemical energy storage technology has garnered attention due to its high energy density and potential for large-scale energy storage.

2. **Advantages of Lithium Orthosilicate as a Heat Carrier Material**:
- Lithium orthosilicate (Li₄SiO₄) exhibits good thermal stability and a relatively high theoretical energy storage density (784.3 kJ/kg) in the medium temperature range (600–900°C), making it a promising thermochemical energy storage material.

3. **Impact of Different Silicon Dioxide Sources**:
- Currently, there is limited research on the impact of different sources of silicon dioxide on the thermochemical energy storage performance of lithium orthosilicate.
- The paper selected six different silicon dioxide sources with varying phases, morphologies, particle sizes, and surface areas as raw materials to synthesize lithium orthosilicate-based thermochemical energy storage materials. It systematically studied the physicochemical properties and comprehensive performance of these materials.

4. **Experimental and Testing Methods**:
- Characterization of the materials was conducted using X-ray diffraction (XRD), scanning electron microscopy (SEM), and laser particle size analysis.
- A series of thermogravimetric analysis (TGA) tests were performed to evaluate CO₂ adsorption performance and corresponding thermochemical energy storage capacity.

Through the above research, the paper aims to reveal the specific mechanisms by which different sources of silicon dioxide affect the performance of lithium orthosilicate-based thermochemical energy storage materials and to provide guidance for the future selection of high-performance lithium orthosilicate-based thermochemical energy storage materials.