Abstract:Direct catalytic upgrading of biomass-derived fast pyrolysis vapors can occur in different process configurations, under either inert or hydrogen-containing atmospheres. This review summarizes the myriad of different catalysts studied and benchmarks their deoxygenation performance by also taking into account the resulting decrease in bio-oil yield compared to a thermal pyrolysis oil. Generally, catalyst modifications aim at improving the initial selectivity of the catalyst to more desirable oxygen-free hydrocarbons and/or improving the catalysts’ stability against deactivation by coking. Optimizing the pore structure and acid site density/distribution of solid acid catalysts can slow down deactivation and prolong activity. Basic catalysts such as MgO and Na2O/γ-Al2O3 are excellent ketonization catalysts favoring oxygen removal via decarboxylation, whereas solid acid catalysts such as zeolites primarily favor decarbonylation and dehydration. Basic catalysts can therefore produce bio-oils with higher H/C ratios. However, since their coke formation per surface area is higher, compared to a microporous HZSM-5 zeolite, precoking (or imperfect regeneration) of these basic catalysts and operating for longer time-on-stream can be approaches to improve the oil yield. In-line vapor-phase upgrading with a dual bed comprising a solid acid catalyst followed by a basic catalyst active in ketonization and aldol condensation further improves deoxygenation while maintaining high bio-oil carbon recovery. Also low-cost catalysts such as iron-rich red mud have deoxygenation activity. An improved bio-oil carbon recoverycompared at a similar level of oxygen removalcan be obtained when changing from an inert atmosphere to a hydrogen-containing atmosphere and using an effective hydrodeoxygenation (HDO) catalyst. To keep costs low, this can be conducted at near-atmospheric pressure conditions. Pt/TiO2 and MoO3/TiO2 showed high activity and reduced coke formation. Stable performance has been demonstrated using Pt/TiO2 for 100+ reaction/regeneration cycles with woody biomass feedstock. If future works can demonstrate the same durability for lower-cost biomass containing higher contents of ash, N, and S, this would considerably boost the commercial viability of near-atmospheric pressure HDO. Further research should be directed to testing the durability of lower-cost HDO catalysts such as MoO3/TiO2 and further improving the activity and stability of lower-cost catalysts.

Catalytic bio-oil upgrading using Fe-Co/Al2O3 and co-processing with vacuum gas oil

Upgrading Phenolic Compounds and Bio-Oil Through Hydrodeoxygenation Using Highly Dispersed Pt/TiO2 Catalyst

Co-hydrotreating of Algae and Used Engine Oil for the Direct Production of Gasoline and Diesel Fuels or Blending Components

Selective production of high-value fuel via catalytic upgrading of bio-oil over nitrogen-doped carbon-alumina hybrid supported cobalt catalysts

Upgrading of Light Bio-oil from Solvothermolysis Liquefaction of an Oil Palm Empty Fruit Bunch in Glycerol by Catalytic Hydrodeoxygenation Using NiMo/Al 2 O 3 or CoMo/Al 2 O 3 Catalysts

Integration of catalytic fast pyrolysis and hydroprocessing: a pathway to refinery intermediates and “drop-in” fuels from biomass

Upgrading of Liquid Fuel from the Vacuum Pyrolysis of Biomass over the Mo–Ni/γ-Al2O3 Catalysts

Upgrading of Pyrolysis Bio-Oil by Catalytic Hydrodeoxygenation, a Review Focused on Catalysts, Model Molecules, Deactivation, and Reaction Routes

Hydrodeoxygenation of Oxygenates Derived from Biomass Pyrolysis Using Titanium Dioxide-Supported Cobalt Catalysts

Continuous flow upgrading of lignin pyrolysis oils to drop-in bio-hydrocarbon fuels over noble metal catalysts

Effective deoxygenation for the production of liquid biofuels via microwave assisted co-pyrolysis of agro residues and waste plastics combined with catalytic upgradation

Improved Catalytic Upgrading of Simulated Bio-Oil Via Mild Hydrogenation over Bimetallic Catalysts

Enhancing Hydrodeoxygenation of Bio-oil via Bimetallic Ni-V Catalysts Modified by Cross-Surface Migrated-Carbon from Biochar

Effective suppression of coke formation with lignin-derived oil during the upgrading of pyrolysis oils

A Review of Recent Research on Catalytic Biomass Pyrolysis and Low-Pressure Hydropyrolysis

Improvement of Properties of Bio-Oil from Biomass Pyrolysis in Auger Reactor Coupled to Fluidized Catalytic Bed Reactor

Hydrotreating of Guaiacol and Acetic Acid Blends over Ni2P/ZSM-5 Catalysts: Elucidating Molecular Interactions during Bio-Oil Upgrading

Bio-oil upgrading by reactive distillation using p-toluene sulfonic acid catalyst loaded on biomass activated carbon

Bio-Oil Upgrading over Bi-Functional Catalyst in CO/H2O System

Catalytic interventions in bio-oil production from lignocellulosic biomass and Co-processing with petroleum refinery fractions: A review

Comparative Production of Bio-Oil from In Situ Catalytic Upgrading of Fast Pyrolysis of Lignocellulosic Biomass