Abstract:Due to ageing of the bridge stock, continuously increasing load requirements, the need for assessing existing bridges is becoming increasingly important. Reinforced concrete (RC) bridge deck slabs are among the most critical parts to the load carrying capacity of bridges. Previous research indicated that the assessment method used in current practice largely underestimate the load-carrying capacity. The objective of the study reported in this licentiate thesis is to develop and calibrate improved methods for assessment of load-carrying capacity and response of existing bridge deck slabs. This study proposes an enhanced assessment through improved structural analysis and resistance evaluation in order to achieve higher detectable load-carrying capacity. To achieve this objective, the scientific approaches including literature study, laboratory tests, analytical analyses and finite element analyses were adopted. Two major studies and a series with supporting tests were conducted as following: A large test series, in which three specimens containing traditional steel bar reinforcement in ordinary concrete, were carried out to study the load carrying capacity and structural behavior of two-way slab. A proposed multi-level assessment method was validated through two case studies: a two-way slab and a cantilever slab. The multi-level assessment method includes simplified analysis, 3D linear FE analysis, 3D nonlinear analysis with shell elements, 3D nonlinear FE analysis with continuum elements include fully bonded reinforcement as well as 3D nonlinear FE analysis with continuum elements including bond-slip for the reinforcement. To develop the modeling strategies for two-way RC slabs with continuum elements, parameter studies has been carried out to investigate the influence of different modeling choices. Parameters including finite element properties, modeling of concrete, modeling of reinforcement and stiffness of supports were varied in different comparative models to investigate the influence. The study shows that existing methods currently used in assessment are not able to accurately reflect the response of RC bridge deck slabs, and underestimate their capacity. With enhanced assessment methods, such as the nonlinear finite element method, it is possible to better reflect the structural behavior, and more accurately determine the load carrying capacity. Two case studies have proven that the multi-level assessment method is able to reflect the structural behavior at different levels of approximation, which is beneficial in evaluating existing RC slabs. The parameter studies indicate that modeling choices such as geometric nonlinearity, crack bandwidth and Poisson’s ratio have significant impact on determination of the load-carrying capacity. Finite element properties, reinforcement model and stiffness of supports influence crack pattern and load distribution respectively.

Failure mode and response of a typical RC straight and skew highway girder bridge under the blast, wrapped with and without a non-Explosive Reactive armour using FEM-SPH coupling

Structural Analysis of Existing RC Bridge Deck Slabs Structural Analysis of Existing RC Bridge Deck Slabs

Static Shear Performance and Residual Axial Capacity of Rectangular RC Bridge Piers under Near-Ground Lateral Loads

Experimental Study and Numerical Analysis of A Composite Bridge Structure

Effectiveness of CFRP Seismic-Retrofit of Circular RC Bridge Piers under Vehicular Lateral Impact Loading

Damage assessment of circular bridge pier incorporating high-strength steel reinforcement under near-fault ground motions

Sustainability and Resiliency Investigation of Grouted Coupler Embedded in RC ABC Bridge Pier at Vehicle Impact

Dynamic response and performance of cable-stayed bridges under blast load: Effects of pylon geometry

An integrated framework for bridge infrastructure resilience analysis against seismic hazard

Effect of Deck Deterioration on Overall System Behavior, Resilience and Remaining Life of Composite Steel Girder Bridges

Dynamic response of a multi-span suspension bridge subjected to highway vehicle loading

Reliability assessment and sensitivity analysis of vehicle impacted reinforced concrete circular bridge piers

Effect of blast loading and resulting progressive failure of a cable-stayed bridge

Analytical Study Of Load Rating On RCC Box Girder Superstructure Under The Effect Of IRC Loadings

Failure analysis and structural resilience of a masonry arch Bridge subjected to blast loads: The Case study, Halilviran Bridge

Numerical Analysis-Based Blast Resistance Performance Assessment of Cable-Stayed Bridge Components Subjected to Blast Loads

Damage evaluation and performance-based design of double-pier RC bridge subjected to vehicle collision

Performance investigation of highway bridge pier columns under the sequential effects of fire followed by vehicle collision and subsequent air blast: A numerical investigation

Effect of structural repairs on the load rating and reliability of a prestressed concrete bridge

Experimental and numerical study on the residual seismic performance of post-blast RC piers