Abstract:The health monitoring of cylindrical elements is particularly important for the safe operation of industrial production, because cylinders bear a lot of support and transmission work. Normal non-destructive evaluation techniques need special designs to suit high curvature surfaces of cylinders. Laser ultrasonic (LU) method can provide a remote and non-destructive inspection solution to solid cylinders due to its flexible adaptability to complex structures and strong penetration depth. However, constrained by the common problems of optical detection systems, the detected ultrasonic signals will suffer low signal-to-noise ratio and bad resolution from poor sample surface quality. Thus, a modified synthetic aperture focusing technique (SAFT) optimized for cylindrical components is proposed to improve the detectability of LU on small and buried defects. Mode conversion wave signals obtained by multiple separate excitations are used in SAFT imaging for the reconstruction of the defects under surface profile correction. To reduce the influence of incident waves such as direct surface acoustic wave, besides common difference method, adjacent wave subtraction algorithm based on cross-correlation is used for signal preprocessing, suppressing the incident waves and exaggerating the mode conversion waves. In numerical simulation, internal defects with diameters from 0.6 to 0.2mm with various buried depths are visualized and accurately located via the optimized SAFT algorithm using mode conversion waves. For validation, a circumferential scanning system is established in LU experiment and internal defects from 0.8 to 0.4mm in diameter inside solid cylinders are successfully detected with precise location. The results elucidate the reliability of characterizing the location of small internal buried defects in solid cylinder structures through LU-SAFT imaging.

Research on quality detection method for axis-hole interference fit based on laser ultrasound

Numerical Study for Surface-breaking Crack Detection on A Cylinder Using Laser-generated Ultrasound

Detecting features of defect metal based on laser ultrasonic technique

Surface Crack Identification on a Cylinder Using the Signal Enhancement of the Scanning Laser Line Source Method

Differential Two-Wave Mixing Interferometer for Crack Detection in Metallic Structures Based on Laser-Induced Ultrasound

Quantitative Detection of Surface Defect Using Laser-Generated Rayleigh Wave with Broadband Local Wavenumber Estimation

Reference-free Crack Detection and Localization by Nonlinear Laser Ultrasonic.

INTEGRATED TECHNOLOGY FOR DETECTION AND REPAIR OF MECHANICAL COMPONENT SURFACE FATIGUE MICROCRACKS USING PULSED LASER

A Study of Inner Crack Testing with the Laser Phased Array Method.

Interference detection method of wing-fuselage joints based on measured data

Automatic identification and location method for shaft-hole interference fit crack based on deep learning

Laser-generated Surface Waves for Quantitative Detection of Inclined Surface Cracks Based on Finite Element Analysis

Numerical Study of Length and Angle Gauging for Subsurface-Inclined Cracks Based on Reflected Surface Waves with Laser Ultrasonic Technique

Quantitative Detection Method for Surface Angled Cracks Based on Laser Ultrasonic Full-Field Scanning Data

Width and Depth Gauging of Rectangular Subsurface Defects Based on All-Optical Laser-Ultrasonic Technology

Defect detection using the phased-array laser ultrasonic crack diffraction enhancement method

Quantitative Detection of Small Crack by Nonlinear Laser Ultrasonics

Connection force measurement of precision small interference components using ultrasound

Integrated detection for open and closed surface fatigue cracks utilizing scanning laser source-induced Rayleigh wave fields with self-reference peak-to-peak features

Quantitative Detection of Lateral Subsurface Cracks Based on Laser-Generated Rayleigh Waves in the Frequency Domain

Characterization of internal defects in cylindrical components using laser ultrasonic method with a modified SAFT algorithm