Abstract:Challenging molecular separation tasks continue to drive the need for advanced membranes, which could combine high productivity and selectivity with outstanding chemical resistance and mechanical robustness. Here, ultra-thin, sub-100 nm carbon molecular sieve (CMS) membranes based on a polymer of intrinsic microporosity precursor were fabricated and characterized with respect to their separation performance for six gases, He, H2, N2, O2, CO2 and CH4. The rarely reported in thin CMS membranes physical aging was tracked until near-equilibrium was reached. The use of commercially available, small pore size (2–5 nm) γ-alumina-coated α-alumina ceramic supports allowed for an easy membrane precursor fabrication by a simple solution coating process. The subsequent application of a protective polydimethylsiloxane layer, as often done in research and membrane production, assured excellent defect control and produced CMS composite membranes with very high membrane permselectivities (e.g. CO2/CH4 = 84.5, H2/CH4 = 360). No significant deviations from bulk properties in terms of the chemical decomposition were discovered in the film thickness range of 60–300 nm. However, a surprisingly massive acceleration of the physical aging in comparison to the bulk was detected in all sub-100 nm membranes including the precursor polymer. All CMS membranes reached near-equilibrium gas transport properties within 1–1.5 months providing a rare opportunity to study aging-stabilized performance. For the aging-stabilized sub-100 nm membranes a decrease in gas permeabilities of up to 3 orders of magnitude was detected. Remarkably, sub-100 nm CMS membranes showed significantly increased selectivities typical to thick isotropic CMS membranes pyrolyzed at 100–200 °C higher temperatures. A clear aging-related shift to more significant size sieving behavior occurred for the majority of the studied CMS membranes throughout the aging period. Overall, our study provides an important observation that excessive reduction of the selective layer thickness, especially in initially highly microporous materials (PIMs, CMS etc.), may not present the best strategy for the optimization of the long-term membrane performance.

The evolution of the structure, mechanical, and gas separation properties of P84 hollow fiber membranes from the polymer to the carbon stage

Molecular‐Sieving Membrane by Partitioning the Channels in Ultrafiltration Membrane by in Situ Polymerization

A High-Permeance Supported Carbon Molecular Sieve Membrane Fabricated by Plasma-Enhanced Chemical Vapor Deposition Followed by Carbonization for Co2 Capture

Sub-100 nm carbon molecular sieve membranes from a polymer of intrinsic microporosity precursor: Physical aging and near-equilibrium gas separation properties

Carbon Molecular Sieve Membranes with Ultra‐Thin Selective Skin Layer by Pyrolysis of Porous Hollow Fibers

Thin Composite Carbon Molecular Sieve Membranes from a Polymer of Intrinsic Microporosity Precursor

Pyrolysis temperature-regulated gas transport and aging properties in 6FDA-DAM polyimide-derived carbon molecular sieve membranes

Carbon molecular sieve/ZSM-5 mixed matrix membranes with enhanced gas separation performance and the performance recovery of the aging membranes

PI/NCC- based carbon molecular sieve membranes for Hydrogen purification: Effect of aging times

Pebax-derived Ultra-Microporous Carbon Molecular Sieve Composite Membrane Assisted by Organic Interlayer for Gas Separation

Fabrication of highly selective hollow fiber membranes based on P84/PES blends for CO2/CH4 separation

Huge improved gas separation performance of carbon molecular sieve membrane by forming a double crosslinked polyimide precursor

Carbon Molecular Sieve Membrane Preparation by Economical Coating and Pyrolysis of Porous Polymer Hollow Fibers

Carbon molecular sieve membranes derived from crosslinkable polyimides for CO2/CH4 and C2H4/C2H6 separations

Carbon molecular sieve membranes fabricated at low carbonization temperatures with novel polymeric acid porogen for light gas separation

Surprising olefin/paraffin separation performance recovery of highly aged carbon molecular sieve hollow fiber membranes by a super-hyperaging treatment

Remarkably enhanced molecular sieving effect of carbon molecular sieve membrane by enhancing the concentration of thermally rearranged precursors

Breaking the Permeability-Selectivity Trade-Off: Advanced carbon molecular sieve membranes derived from thermally rearranged Mixed-Matrix membrane precursors

The utilization of micro-mesoporous carbon-based filler in the P84 hollow fibre membrane for gas separation

Super high gas separation performance membranes derived from a brominated alternative PIM by thermal induced crosslinking and carbonization at low temperature

The effect of structure change from polymeric membrane to gel membrane on CO2 separation performance