Abstract:The stainless-clad (SC) bimetallic steel is an advanced high-performance steel with high strength and outstanding corrosion-resistant performance. It is especially competitive in the application of structures with demands of high corrosion resistance. However, the current research on SC bimetallic steels mainly focuses on the material level rather than the structural level, and it is not clear whether the excellent performance of materials can be reflected in the seismic behaviours of members. Thus, cyclic behaviours of SC bimetallic steel members need to be thoroughly investigated to fill the research gap and expand the application fields of this steel in the seismic region. To this end, this paper aims to study the cyclic behaviour of SC bimetallic steel box-section beam-columns subjected to combined constant axial load and low-cycle reciprocating lateral load through full-scale tests and finite element (FE) models. Four specimens were tested, and the influence of the width-to-thickness ratio of component plates was clarified through comparative research on the test processes, buckling details, hysteresis curves, strain curves, energy dissipation and ductility performance. Moreover, a refined FE model adopted single-layered modelling or double-layered modelling was developed respectively; and then, the model validation, the shear stress distribution at the bonding interface and parametric analyses were carried out. Research showed that the SC bimetallic steel beam-columns exhibit good energy dissipation and seismic behaviour under cyclic loadings; the smaller width-to-thickness ratio or axial load ratio could result in the plumper hysteresis curves, more sufficient energy dissipation and superior ductility performance; the ductility performance of SC bimetallic steel column was significantly improved; the ductility-based design approach proposed herein could approximately quantify the ductility performance of SC bimetallic steel box-section column, which could provide a reference for the seismic design.

Classification and ultimate capacity of duplex stainless steel H-section under cyclic loading

Classification criteria for austenitic stainless steel H-section under cyclic loading about major-axis

Influence of Cyclic Hardening Characteristic on Seismic Performance of Welded Austenitic Stainless Steel H-section Beam-Column

Design of Austenitic and Duplex Stainless Steel SHS and RHS Beam-Columns

Experimental research on stainless steel welded I-section beam-columns

Experimental and Numerical Studies on Hysteretic Behaviour of Stainless Steel Welded Box-Section Columns

Local buckling and hysteretic behavior of Q690 high-strength steel box-section beam–columns

Life-cycle Assessment and Prediction on Ultimate Capacity of Corroded Q690 Steel Columns with H-section under Bi-directional Cyclic Loading

Seismic Performance of Welded Stainless Steel H-Section Columns under Cyclic Horizontal Loading

Global Buckling of S35657 Austenitic Stainless Steel Welded Box- and I-section Long Columns under Axial Compression

Seismic Behaviour of Stainless-Clad Bimetallic Steel Welded Box-Section Beam-Columns

Web crippling of stainless steel built-up I-sections under End-Two-Flange loading: Tests, simulations and design

Experimental and numerical study of hot-rolled duplex stainless steel CHS columns

Cross-section behaviour of cold-formed high strength steel irregular hexagonal hollow section stub columns under combined compression and bending

Compression tests on local buckling behavior of welded stainless steel Ⅰ-section stub columns

Test and Numerical Simulation of the Axial Compressive Capacity of Concrete Columns Reinforced by Duplex Stainless Steel Bars

Hysteretic performance of thin-walled Q690 high-strength steel H-section beam-columns bent about the weak-axis

Cyclic Loading Tests and Numerical Modeling of Concrete-Filled 700 MPa High-Strength Steel Tubes Incorporating Deep Plasticity

Experimental and analytical research on seismic performance of ECC-filled high-strength double skin steel tubular columns with out-of-code D / t ratios

Study on the bearing capacity of S600E high-strength stainless steel welded cross-sections

Cyclic Behaviour and Modelling of Stainless-Clad Bimetallic Steels with Various Clad Ratios