Abstract:High brittleness is the prerequisite for the creation of a hydraulic fracture network, which is crucial for shale reservoir development. The test evaluation methods are restricted in the field by lack of continuous brittleness profiles. Mineralogical evaluation cannot incorporate the external factors like stress state. The most widely used method is mechanical evaluation method based on statistical results of Young's modulus and Poisson's ratio. This method cannot explain the brittle tensile failure mechanism of shale and contradiction between high brittleness and barriers of high strength rock. With these methods, brittle evaluation and interval selection errors will happen in the application. Starting from the mechanism of rock failure and considering the effect of rock mechanical properties on brittleness, a new method for rock brittleness evaluation has been established. Firstly, the failure surface features were analyzed and the dominant mechanisms in complex failure were identified with triaxial test and scanning electron microscopy test. Secondly, a stress model for shale reservoirs with thin sand and shale interbedded was set up based on elasticity and the factors affecting the stress distribution and failure modes have been analyzed. Eventually, based on experiments and theoretical recognition, the brittleness index for shale was proposed by integrating Young's modulus, Poisson's ratio and fracture toughness. Moreover, a method for acquiring brittleness index from well logs was developed from which brittleness profiles for shale formations in Sichuan basin were obtained. Failure features analysis demonstrates that tensile failure dominates during rock brittle failure. It was observed that compression stress on rock is only relevant to mechanical parameters and independent of space location under both internal and external stresses. Finally, comparison with the results from Rickman's method and microseismic monitoring demonstrates that the method developed in this work possesses more satisfactory results of brittleness evaluation and interval selection in field application.

Brittleness Effect on Acoustic Emission Characteristics of Rocks Based on a New Brittleness Evaluation Index

Rock Brittleness Evaluation Based on Energy Dissipation under Triaxial Compression

A New Brittleness Index Considering Radial Strain Energy Dissipation

A new brittleness index based on crack characteristic stress and its engineering applications

Study on Staged Damage Behaviors of Rock-like Materials with Different Brittleness Degrees Based on Multiple Parameters

Acoustic Emission Behavior of Brittle Rocks under Uniaxial Compression

Cracking Behavior and Acoustic Emission Characteristics of Rock Containing a Single Preexisting Flaw

Evaluation Method of Rock Brittleness under True Triaxial Stress States Based on Pre-peak Deformation Characteristic and Post-peak Energy Evolution

Evaluation method of rock brittleness based on post-peak energy conversion under monotonic and cyclic triaxial compression

Evaluation of Rock Brittleness Index under Dynamic Load

Assessment method for determining rock brittleness based on statistical damage constitutive relations

A method to evaluation rock brittleness based on statistical damage constitutive parameters

A brittleness evaluation method of rock constitutive relationship with Weibull distribution based on double‐body system theory

Evaluation of Rock Brittleness Based on Complete Stress–Strain Curve

A New Method for Shale Brittleness Evaluation

Interrelation analysis method of acoustic emission for failure prediction of brittle failure based on vibration mechanics

Experimental study on acoustic emission (AE) characteristics and crack classification during rock fracture in several basic lab tests

Experimental investigation on brittleness characteristics of rock based on the ubiquitiformal complexity: strain rate effect and size effect

Acoustic Emission Characteristics of Red Sandstone Specimens Under Uniaxial Cyclic Loading and Unloading Compression

Experimental Study on the Effect of Brittleness on the Dynamic Mechanical Behaviors of the Coal Measures Sandstone

Comparative analysis on different AE parameters in biaxial loading of hole rock