Abstract:Furnish generation and size fractionation for ultra‐low‐density hemp hurd particleboard fabricated with thermosetting adhesives and subsequent physico‐mechanical property assessment. This study investigated Australian hemp hurd (Cannabis sativa L., "Frog One") as a lignocellulosic raw material for ultra‐low‐density hemp particleboard (ULHPB) with densities ranging from 213 to 309 kg/m3. The hurd was first milled and fractionated into three particle size categories, that is, fine (F), medium (M), and coarse (C). Twelve unique ULHPB variants were then fabricated comprising varying particle loadings from four particle size mixes, that is, 100% C, 100% M, 50%/50% CM, 25%/50%/25% CMF, and adhesive contents of bio‐epoxy (EPX), phenol resorcinol formaldehyde (PRF), and emulsifiable methylene diphenyl diisocyanate (MDI), respectively. The panel assessments, conducted in accordance with the Australian reconstituted wood‐based panels standard AS/NZS 1859.1 (2017), revealed a significant effect of particle dimension on most physico‐mechanical properties. Furthermore, the resination method and pressing temperature controlled post‐cure panel expansion and additional panel characteristics. Notably, MDI‐ULHPB exhibited drastically different behavior and properties compared to EPX and PRF equivalents, demonstrating greater bending strength, stiffness, screw withdrawal strength, and dimensional stability. Importantly, all MDI variants conformed to the 15% thickness swelling limit for moisture resistant particleboard. Surface lamination of MDI‐bonded ULHPB with sheets of aluminum, Masonite, and Kraft liner significantly improved the inherently low flexural properties, suggesting the potential suitability of ULHPB as a core layer in lightweight sandwich composite panels. The integration of agricultural by‐products, such as hemp hurd, into engineered building materials presents a promising opportunity to mitigate the depletion of finite timber resources and aligns well with circular economy principles. Highlights Utilizing agricultural residue as sustainable raw material in building products. Hemp hurd enables ultra‐low‐density particleboard with thermosetting resins. Coarse particle size mix enhances mechanical performance in panels. Panel characteristics controlled by resination method and pressing temperature. Lamination enhances functionality of lightweight hemp hurd sandwich panel.

Effect of the particle geometry on lightweight particleboard from Paulownia using high-frequency pressing technology

High-Pressure Treatment Effects on Density Profile, Surface Roughness, Hardness, and Abrasion Resistance of Paulownia Wood Boards

Effects of High-Pressure Treatment on Poplar Wood: Density Profile, Mechanical Properties, Strength Potential Index, and Microstructure

High-pressure Densification and Hydrophobic Coating for Enhancing the Mechanical Properties and Dimensional Stability of Soft Poplar Wood Boards

Characteristics of the Pressing Process and Density Profile of MUPF-Bonded Particleboards Produced from Waste Plywood

High-Pressure Treatment of Chinese Fir Wood: Effect on Density, Mechanical Properties, Humidity-Related Moisture Migration, and Dimensional Stability

Properties of particleboards made from mixture of oversized fibers from MDF waste process and wood particles of Norway spruce (Picea abies)

Low-Density Particleboards Modified with Expanded and Unexpanded Fillers-Characteristics and Properties

Influence of panel density on the characteristics of novel multifunctional particleboard

Leveraging Spruce Bark Particle Morphology for Enhanced Internal Bonding in Particleboard Production

Experimental Investigation on the Mechanical and Physical Properties of Particleboard From Residual Materials With Lowland Bamboo Chip Composition

Influence of particle granulometry and panel composition on the physico‐mechanical properties of ultra‐low‐density hemp hurd particleboard

Physical and Mechanical Properties of Particleboard Produced with Addition of Walnut (Juglans regia L.) Wood Residues

Selected Properties of Single and Multi-Layered Particleboards with the Structure Modified by Fibers Implication

Effect of Particle Sizes on the Physio-Mechanical Properties of Bamboo Particleboard

Mechanics Properties of Paulownia Core Sandwich Composites

Feasibility and properties of flat-pressed three-layer bamboo-rubberwood particleboards for resource-efficient production

Densification of fast-growing paulownia wood for tough composites with stab resistance

Physical and Mechanical Properties of Particleboard Produced from Some Timber Trees Irrigated with Treated Wastewater

Effect of corn stalks and palm fibers ratio on physical, mechanical, and durability properties of particleboard

Selected Physical and Mechanical Properties of Particleboards Manufactured from Plantation Willow and Poplar Wood