Abstract:The sealing capacity of magnetofluidic (MF) rotating seals is limited by the highest magnetization of the sealing ferrofluids (FFs) of about 1000 G (80 kA m-1). A sharp, almost an order of magnitude, increase in the supported pressure drop is possible by using a magnetorheological (MR) suspension as sealing fluid, owing to the much higher saturation magnetization of MR fluids compared to FFs. However, rotating seals with MR fluids have several shortcomings, such as a significant increase of the friction torque due to the growth of shear stress in the strong magnetic field specific to MF seals and leakage of the non-magnetic carrier liquid. At least partly, these issues can be avoided by using ferrofluid based extremely bidisperse MR suspensions of micrometer-sized iron (Fe) particles dispersed in a ferrofluid, as sealing fluid. The composite Fe3O4-Fe magnetic fluid used in this study consisted of hundreds of nanometers up to few microns size structures of interconnected (welded) Fe nanoparticles (FeMNPs) dispersed in a high colloidal stability ferrofluid with 500 G (40 kA m-1) saturation magnetization. The volume fraction of iron NPs varies from 0.5 to 15% in the ferrofluid carrier which significantly increases the magnetization and simultaneously produces important changes of flow properties in magnetic field of the resulting composite fluid, from Newtonian to strongly non-Newtonian behavior. The evaluation of the magnetic and magnetorheological behavior includes the dependence of magnetization, effective viscosity, magnetoviscous effect and dynamic yield stress on the volume fraction of Fe nanoparticles dispersed in the ferrofluid carrier. The seal gap filled with interconnected Fe nanospheres consists in randomly distributed microregions with a high intensity and high gradient magnetic field that captures the ferrofluid and provides a new sealing mechanism. Already a small amount of interconnected Fe nanospheres additive (2.5-5.0% volume fraction) produces four times increase of the rotating seal burst pressure, a much higher increase than what can be obtained from using a conventional magnetic fluid with the same magnetization. The nano-composite sealing magnetic fluid proved to be a cost-effective solution to significantly increase the performance of multi-stage rotating MF seals.

Effect of a high-gradient magnetic field on particle concentration distribution in a magnetic fluid seal: Rivalry of the diffusion and magnetophoresis

The Simulation of the Magnetic Particle Deposition and the Effect on the Magnetic Fluid Sealing Performance

Cfd Study on the Magnetic Fluid Delivering in the Vessel in High-Gradient Magnetic Field

Influence of Viscosity and Magnetoviscous Effect on the Performance of a Magnetic Fluid Seal in a Water Environment

Theory analysis and experimental study on magnetic fluid injection of multi-stage magnetic fluid seal

High magnetization composite magnetic fluid: structure, magnetorheology and new sealing mechanism in rotating seals

Experimental visualization of the lifetime and self-healing of magnetic fluid seals

Experimental and theoretical investigation on magnetic fluid seal in capillary tube

Advanced Applications of Magnet in Magnetic Fluid Seal: A Developers’ Perspective

Non-Uniform Distribution of Magnetic Fluid in Multistage Magnetic Fluid Seals

Theoretical Analysis and Experimental Study on the Influence of Magnet Structure on Sealing Capacity of Magnetic Fluid Seal

Advances in Magnetic Fluid Seal and Structures

Design and Performance Study of Magnetic Field Generator of Magnetic Liquid Hydrodynamic Seal

Influence of Particle Size Distribution of Magnetic Fluid on the Resistance Torque of Magnetic Fluid Seal

Theory Analyses and Experimental Study on Starting Torque and Seal Capacity of Field-Control Magnetic Fluid Seal

Experimental Study for Magnetic Fluid Seal

The effect of inter-particle hydrodynamic and magnetic interactions in a magnetorheological fluid

Decoupled Computations of Magnetic Field on Magnetic Fluid Seal

Magnetic fluid seal critical pressure calculation based on numerical simulations

Influences of Fluid and System Design Parameters on Hydrodynamically Driven Low Gradient Magnetic Separation of Magnetic Nanoparticles

An analysis on the magnetic fluid seal capacity