Abstract:We have extensively investigated the characteristics of temperature and strain sensing for two high order (the 3rd and 4th order) fiber Bragg Gratings (FBGs). The FBGs were manufactured in a single mode fiber (SMF-28) without hydrogen-loading utilizing femtosecond laser based on a point-by-point direct writing method. The annealing process was studied under the response of temperature up to 900℃. With regarding to the 3rd-order gratings, the experimental sensitivity of temperature (T-sensitivity) was 15 pm/℃ in the range of 25-900℃ and that of longitudinal strain (S-sensitivity) was 3.7 pm/ ℃ in the range of 0- 1824 με. For the 4th-order gratings, T-sensitivity was 13 pm/℃ in the range of 22-900℃ and S-sensitivity was 1.1 pm/με in the range of 0-1824 με, the experimental value of which were lower than that of the 3rd-order FBG. During the isothermal annealing process, we achieved that the peak reflectivity of 98% (-17.3 dB transmission loss) with stability in high-temperature at Bragg wavelength of 1548.5 nm for the 3rd-order gratings and the peak reflectivity of 93% (-11.6 dB transmission loss) at Bragg wavelength of 1411.3 nm for the 4rd-order gratings. It indicated that the sensitivity of the FBGs depends on the mode order. The proposed FBGs have potential for high-temperature sensing and high-resolution strain sensing. The multi-parametric detection and hazardous environment monitor based on the FBGs can be accomplished in the near future.

Resonant THz sensor for paper quality monitoring using THz fiber Bragg gratings

Tilted Fiber Bragg Gratings and Its Fiber Humidity and Twist Sensing Applications

Fiber Optic Relative Humidity Sensor Based On The Tilted Fiber Bragg Grating Coated With Graphene Oxide

Modeling and analysis of localized biosensing and index sensing by introducing effective phase shift in microfiber Bragg grating (μFBG)

Nanoimprinted Polymer Micro/Nanofiber Bragg Gratings for High-Sensitivity Strain Sensing

Reflective Optical Fiber Sensors Based on Tilted Fiber Bragg Gratings Fabricated With Femtosecond Laser

Tilted Fiber Bragg Grating Inscription in Boron Co-Doped Photosensitive Optical Fiber Using 266 nm Solid State Laser Pulses

Towards high-sensitivity and high-accuracy forward Brillouin scattering-based optomechanical temperature sensing in thin-diameter fibers

High Sensitivity Refractometer Based on Tapering Two-Mode Fiber Embedded Long-Period Fiber Grating

Near-infrared microfiber Bragg grating for sensitive measurement of tension and bending

High-Resolution Sensing System Based on Fiber Bragg Grating Fabry–Perot Interferometer and Frequency-Domain Demodulation

A novel graphene tilt fiber grating sensor prepared by PLD and its photosensitive characteristics

Fiber Bragg Grating with Enhanced Cladding Modes Inscribed by Femtosecond Laser and a Phase Mask

High sensitivity fiber optic strain sensor based on CFBG-FPI and vernier effect

Enhanced Bragg Resonances in Small Period Long Period Fiber Grating Fabricated with Femtosecond Laser Line by Line Technique

High-order fiber Bragg grating fabricated by femtosecond laser pulses for high-sensitivity temperature and strain sensing

Strain sensor system based on a high finesse fiber Bragg grating Fabry-Perot cavity

Design and Characteristics of Refractive Index Sensor Based on Thinned and Microstructure Fiber Bragg Grating

Resonant fiber-optic thermometry with high resolution and wide range

High sensitivity fiber optic temperature sensor based on CTFBG-FPI and vernier effect

High-Resolution Strain/Temperature Sensing System Based on A High-Finesse Fiber Cavity and Time-Domain Wavelength Demodulation