Abstract:Highlights: (1) A 3D simulation model of MWA (microwave ablation) based on the temperature-dependent characteristic parameters and blood flow parameters was established to realize the visual simulation of temperature distribution and coagulation zone. The internal forced convection condition was used to accurately characterize the large vessel. (2) The ex vivo MWA experimental platform was built to verify the accuracy of the simulation model. A peristaltic pump was employed for operatively controlling blood circulation and a medical soft plastic tube was introduced for appropriately simulating a blood vessel. (3) The influences of blood flow parameters of large vessels on temperature distribution and coagulation zone were systematically analyzed in order to provide reference and guidance for MWA clinicians. Purpose: Clinical MWA of liver tumor is significantly limited by the accurate prediction of vascular cooling effects. To provide reference and guidance for clinical MWA of liver tumor, the three-dimensional effects of different blood flow parameters of large vessels on MWA temperature distribution were systematically evaluated. Materials and methods: Firstly, the MWA three-dimensional finite element simulation model with blood flow parameters was established. Secondly, to verify the effectiveness of the model, MWA was performed ex vivo in porcine liver for 360 s and the temperature was measured by thermocouples. A medical soft plastic tube was placed parallel to the MWA antenna to simulate a natural liver vessel. Finally, based on this model, the influences of different vessel diameters and vessel-antenna spacings on MWA temperature distribution were analyzed. Results: Sixteen ablations were performed to verify the accuracy of the simulation model. The mean temperature errors between measured data and simulation results at six measurement points were 3.87 ℃. In the first 10 seconds of MWA, the vessel cooling effect on temperature distribution was negligible. When the vessel-antenna spacing was 5 mm and the vessel diameter varied from 3 mm to 6 mm, the temperature at the measured point near the vessel decreased by 2.11 ℃ at 360 s. When the vessel diameter was 6 mm and the vessel-antenna spacing varied from 5 mm to 7 mm, the temperature at the measured point near the vessel reduced by 14.91 ℃ at 360 s. In addition, blood diameter had little influence on the temperature distribution near the heating point. The volume of coagulation zone will not be obviously affected once the vessel lies outside the predicted coagulation zone. Conclusions: The MWA simulation model with blood flow parameters is established. Vessel-antenna spacing is the primary factor affecting the temperature distribution. A vessel with larger diameter can have a more significant effect on the temperature distribution. The large vessel will take away and block part of conduction heat, so the coagulation zone will not be formed on the lateral side of the vessel.

Interaction Between Microbubbles and Microwave Ablation

The Enhanced HIFU-induced Thermal Effect Via Magnetic Ultrasound Contrast Agent Microbubbles.

Study on Hypovascular Tumor' S Treatment with Targeted Mierobubbles Combined with Ultrasonic Abrupted Destroy

Formation Process of Thermal Damage in a Target Area of High Intensity Focused Ultrasound and Effectiveness Analysis of B-ultrasound Real-Time Monitoring

Experimental assessment of microwave ablation computational modeling with MR thermometry

Factors Impacting Microwave Ablation Zone Sizes: A Retrospective Analysis

Microbubble-Facilitated Ultrasound Catheter Ablation Causes Microvascular Damage and Fibrosis

Acoustic emissions during 3.1 MHz ultrasound bulk ablation in vitro

Feasibility Study of Microsecond Pulsed Microwave Ablation Using a Minimally Invasive Antenna

The Study of Enhanced High-Intensity Focused Ultrasound Therapy by Sonodynamic N2O Microbubbles

Ultrasound and microbubbles: Their generation, detection and potential utilization in tissue and organ therapy—Experimental

Intravital imaging and cavitation monitoring of antivascular ultrasound in tumor microvasculature

Distinct Immunoreactions after Microwave Ablation of Primary Tumor with Different Heating Parameters in VX2 Tumor Model

Influences of blood flow parameters on temperature distribution during liver tumor microwave ablation

Microbubble-enhanced transcranial MR-guided focused ultrasound brain hyperthermia: heating mechanism investigation using finite element method

Fast Ultrasonic Ablation Monitoring: an Innovative Approach Using Ultrasound RF Signals and Singular Value Decomposition

[Effect of low-dose focused ultrasound pre-irradiation versus microbubbles for enhancing high-intensity focused ultrasound ablation of VX2 hepatic tumor in rabbits].

Impact of ultrasound-targeted microbubble destruction with different acoustic intensities combined with carboplatin sustained release microspheres on the tumor microenvironment temperature and drug release concentration

Effect of high blood flow on heat distribution and ablation zone during microwave ablation‐numerical approach

Distinct immunoreactions after a primary tumor microwave ablation using different heating parameters in a VX2 tumor model

Reducing electromagnetic interference in MR thermometry: A comparison of setup configurations for MR-guided microwave ablations