Effects of CH4 mixing on the laminar burning velocity and Markstein length of RP-3/air premixed flame

Yu Liu,Jinduo Wang,Wu Gu,Hongan Ma,Wen Zeng

DOI: https://doi.org/10.1016/j.fuel.2020.119761

IF: 7.4

2021-04-01

Fuel

Abstract:<p>Experiments have been carried out in a constant volume combustion bomb to investigate the effects of initial temperature (450 and 480 K), initial pressure (0.1 and 0.3 MPa) and CH₄ mixing ratio (0, 0.2, 0.4, 0.6, 0.8, 0.85, 0.9 and 0.95) on the laminar burning velocity and Markstein length of homogeneous, quiescent CH₄/RP-3/air mixture over wide equivalence ratio from 0.7 to 1.4. Results show that with the increase of initial temperature from 450 to 480 K, no cellular structure in flame is observed, but obvious cellular structure is observed when initial pressure increases to 0.3 MPa at equivalence ratio of 1.2. The laminar burning velocity reaches its maximum in slightly rich mixture (ϕ = 1.1) and with the increase of initial temperature and decrease of initial pressure the peak laminar burning velocity of CH₄/RP-3/air mixture increases. It is found that the laminar burning velocity of CH₄/RP-3/air mixture decreases slowly when methane mixing rate increase from 0 to 0.8, but decreases rapidly from 0.8 to 0.95. Analysis results show that at equivalence ratio of 1.1, the Arrhenius factor <span class="math"><math>exp-Ta/2Tad</math></span> has greater effect on the laminar burning velocity of CH₄/RP-3/air mixtures when the methane mixing ratio is larger than 0.8. At equivalence ratio of 0.8 (lean mixture), with the increase of CH₄ mixing ratio the <span class="math"><math>Le-1</math></span> decreases, which leads to the decrease of Markstein length and make the premixed flame tends to be unstable, while at equivalence ratio of 1.4 (rich mixture), with the increase of CH₄ mixing ratio the <span class="math"><math>Ze</math></span> and <span class="math"><math>δ</math></span> increase, which stabilizes the premixed flame.</p>

energy & fuels,engineering, chemical