Abstract:Recent research efforts have highlighted the potential of hybrid composites in the context of additive manufacturing. The use of hybrid composites can lead to an enhanced adaptability of the mechanical properties to the specific loading case. Furthermore, the hybridization of multiple fiber materials can result in positive hybrid effects such as increased stiffness or strength. In contrast to the literature, where only the interply and intrayarn approach has been experimentally validated, this study presents a new intraply approach, which is experimentally and numerically investigated. Three different types of tensile specimens were tested. The non-hybrid tensile specimens were reinforced with contour-based fiber strands of carbon and glass. In addition, hybrid tensile specimens were manufactured using an intraply approach with alternating carbon and glass fiber strands in a layer plane. In addition to experimental testing, a finite element model was developed to better understand the failure modes of the hybrid and non-hybrid specimens. The failure was estimated using the Hashin and Tsai-Wu failure criteria. The specimens showed similar strengths but greatly different stiffnesses based on the experimental results. The hybrid specimens demonstrated a significant positive hybrid effect in terms of stiffness. Using FEA, the failure load and fracture locations of the specimens were determined with good accuracy. Microstructural investigations of the fracture surfaces showed notable evidence of delamination between the different fiber strands of the hybrid specimens. In addition to delamination, strong debonding was particularly evident in all specimen types.

Stress Evaluation Through the Layers of a Fibre-Metal Hybrid Composite by IHD: An Experimental Study

Micro Failure Analysis of Fiber Metal Laminates

A novel approach based on stress-impedance effect to assess the interfacial properties in fiber-reinforced composites

Experimental determination of residual stresses in composite laminates [0(2)/theta(2)](s)

Experimental determination of residual stresses in composite laminates [02/θ2]s

Pre-use Interfacial Shear Strength Prediction for Fiber-Reinforced Thermosetting Composites Based on Stress-Impedance Effect of Ferromagnetic Microwires

On the Sensing and Calibration of Residual Stresses Measurements in the Incremental Hole-Drilling Method

Experimental Study of the Residual Stress of Integrated Composite Structure

An Experimental and Numerical Study of Repairs on Composite Substrates with Composite and Aluminum Doublers Using Riveted, Bonded, and Hybrid Joints

Model of multilayered materials for interface stresses estimation and validation by finite element calculations

Strength Analysis Methods for High Stress Gradient Parts in Composite Structures Ensuring Design Office Requirements

Stress analysis of a multilayered composite cylinder with defects

Stress Analysis of A Multilayered Composite Cylinder with Broken Fibres over A Finite Region

An In-Situ Investigation of the Strain Partitioning and Failure Across the Layers in a Multi-Layered Steel

Microscale Intrinsic Properties of Hybrid Unidirectional/woven Composite Laminates: Part I Experimental Tests

Experimental and Numerical Investigation of the Mechanical Properties of 3D-Printed Hybrid and Non-Hybrid Composites

A comparative study on failure mechanisms of open-hole and filled-hole composite laminates: Experiment and numerical simulation

Homogenized and Localized Stress Reconfigurations of Solid or Hollow Fiber Reinforced Materials in a Multi-Scale Framework

Image-Based Inertial Impact Test for Composite Interlaminar Tensile Properties

Full-Field Measurement of Residual Stresses in Composite Materials Using the Incremental Slitting and Digital Image Correlation Techniques

The influence of the inter-ply hybridisation on the mechanical performance of composite laminates: Experimental and numerical analysis