Abstract:Before the implementation of offshore oil and gas exploitation, it is essential to understand the various factors that influence the stability of submarine sediments surrounding the project. Considering the factors such as cost and operability, it is not feasible to assess the physical-mechanical properties of sediments covering the entire region by borehole sampling. In this study, the correlation between near seafloor seismic amplitude and the mean shear strength of shallow sediments was explored using seismic and core testing data from the northern continental slope area of the South China Sea. Results showed that the mean water content of sediments in the layer up to 12 m below the seafloor (mbsf) gradually increased with increasing water depth, and the mean shear strength tended to decrease rapidly near the 1 000 m depth contour. The near seafloor seismic amplitude could reflect the mean shear strength of sediments in the 12 mbsf layer under seismic frequency of 65 Hz and wave velocity of 1 600 m/s. When the mean shear strength was greater than 10 kPa or the water depth was less than 1 000 m, there was a significant linear positive correlation between mean shear strength and near seafloor seismic amplitude. Otherwise, there was a significant linear negative correlation between mean shear strength and near seafloor seismic amplitude. On the basis of these correlations, the pattern of shear strength was estimated from near seafloor seismic amplitude and mapped. The mean shear strength of sediments above 12 mbsf gradually decreased with increasing water depth in the continental slope area, whereas little change occurred in the continental shelf and the end of the canyon. Within the canyon area, the mean shear strength of sediments was characterized by larger values in both sides of the canyon walls and smaller values in the canyon bottom, which was consistent with the infinite slope stability theory. The study provides a method for using near seafloor seismic amplitude data to guide sediment sampling design, and presents a continuous dataset of sediment strength for the simulation of regional sediment stability.

Physical mechanism of the variation of longitudinal wave velocity with porosity in seafloor sediments

Analysis of abnormal phenomenon on the acoustic test for frozen soils

Wave Reflection and Transmission in Seawater-Unconsolidated-consolidated Sediment Models Based on VGS(λ) and Biot Theories

Probabilistic analysis of wave-induced dynamic response in a poroelastic sloping seabed using random finite element method

Shear wave velocity in sand based on microscopic size

Shear Wave Velocity in Sand Considering the Effects of Frequency Based on Particle Contact Theory

Numerical Study On The Movement Of Muddy Seabed Under Waves

Longitudinal wave propagation in a rod with variable cross-section

Attenuation Characteristics of Refracted Seismic Wave in the Continent-Ocean Transition Zone of the Northeastern South China Sea

Correlation between acoustic velocity and physical parameters of sea floor sediments: a case study of the northern South China Sea

Analysis on acoustic velocity characteristics of sediments in the northern slope of the South China Sea

Characterization of spatio-temporal distributions of wave-induced pore pressure in a non-cohesive seabed: Amplitude-attenuation and phase-lag

Analytical Solution for Wave-Induced Response of Seabed with Variable Shear Modulus

On-deck vs. laboratory analyses of the sound velocity of sediments from the Huanghai and Bohai seas

Rock physics characteristics of marine sediments in the South China sea: The link between the geological factors and elastic properties

Characteristic porosity for wave dispersion in rocks

Compressional Wave Velocity and Its Physical Nature in Saturated Soils with Extreme Permeability Values

Physical-mechanical properties of sediments and their correlation with near seafloor seismic amplitude in the Liwan canyon area, northern South China Sea

Study On Attenuation Mechanism Of Seismic Wave In Unconsolidated Sediment Of Desert Area

An Analysis of Seismic Attenuation in Random Porous Media

A dual‐porosity model incorporating uniaxial stress effect and its application in wave velocity estimation with well‐logging data