Abstract:High-entropy alloys (HEAs) are considered alternatives to traditional structural materials because of their superior mechanical, physical, and chemical properties. However, alloy composition combinations are too numerous to explore. Finding a rapid synthesis method to accelerate the development of HEA bulks is imperative. Existing in situ synthesis methods based on additive manufacturing are insufficient for efficiently controlling the uniformity and accuracy of components. In this work, laser powder bed fusion (L-PBF) is adopted for the in situ synthesis of equiatomic CoCrFeMnNi HEA from elemental powder mixtures. High composition accuracy is achieved in parallel with ensuring internal density. The L-PBF-based process parameters are optimized; and two different methods, namely, a multi-melting process and homogenization heat treatment, are adopted to address the problem of incompletely melted Cr particles in the single-melted samples. X-ray diffraction indicates that HEA microstructure can be obtained from elemental powders via L-PBF. In the triple-melted samples, a strong crystallographic texture can be observed through electron backscatter diffraction, with a maximum polar density of 9.92 and a high ultimate tensile strength (UTS) of (735.3 ± 14.1) MPa. The homogenization heat-treated samples appear more like coarse equiaxed grains, with a UTS of (650.8 ± 16.1) MPa and an elongation of (40.2% ± 1.3%). Cellular substructures are also observed in the triple-melted samples, but not in the homogenization heat-treated samples. The differences in mechanical properties primarily originate from the changes in strengthening mechanism. The even and flat fractographic morphologies of the homogenization heat-treated samples represent a more uniform internal microstructure that is different from the complex morphologies of the triple-melted samples. Relative to the multi-melted samples, the homogenization heat-treated samples exhibit better processability, with a smaller composition deviation, i.e., ⩽ 0.32 at.%. The two methods presented in this study are expected to have considerable potential for developing HEAs with high composition accuracy and composition flexibility.

Accelerated multi-property screening of Fe–Co–Ni alloy libraries by hyper-heuristic combinatorial flow synthesis and high-throughput spark plasma sintering

A novel and sustainable method to develop non-equiatomic CoCrFeNiMox high entropy alloys via spark plasma sintering using commercial commodity powders and evaluation of its mechanical behaviour

Experimentally validated inverse design of multi-property Fe-Co-Ni alloys

High‐Throughput Method–Accelerated Design of Ni‐Based Superalloys

In-situ High Throughput Synthesis of High-Entropy Alloys

Rapid Screening of Magnetic Properties in Several Fe-X-Ni Systems Via Combinatorial Materials Chip Method

A high-throughput strategy for rapid synthesis and characterization of Ni-based superalloys

High-Throughput Multi-Principal Element Alloy Exploration Using a Novel Composition Gradient Sintering Technique

Accelerated discovery of high-performance Cu-Ni-Co-Si alloys through machine learning

High-Throughput Rapid Experimental Alloy Development (HT-READ)

Accelerating First Principles Calculation of Multi-Component Alloy Steady-State Structure and Elastic Properties in Full Component Space

Rapid construction of composition-phase-magnetic properties maps in Fe-Co-Ni systems via combinatorial materials chip method

Rapid in situ alloying of CoCrFeMnNi high-entropy alloy from elemental feedstock toward high-throughput synthesis via laser powder bed fusion

Exploring NiCrAlYSiTa multicomponent coatings: Combining high-throughput synthesis and CALPHAD modeling

High throughput in-situ synthesis of Fe-Cr-Ni alloys via laser powder bed fusion: exploring the microstructure and property evolution

Continuous synthesis of high-entropy alloy nanoparticles by in-flight alloying of elemental metals

Optimizing the High-Frequency Magnetic Properties of Soft Magnetic Composites Via Surface Nanoengineering

Synthesis and characterization of a novel Full-Heusler high entropy intermetallic compound-(FeCoNi) 2 TiSb

Fast and High‐Throughput Synthesis of Medium‐ and High‐Entropy Alloys Using Radio Frequency Inductively Coupled Plasma

Fabricating Homogeneous FeCoCrNi High-Entropy Alloys via SLM In Situ Alloying

Sparking mashups to form multifunctional alloy nanoparticles