Abstract:Solid oxide fuel cell (SOFC) is a clean and efficient power generation device, which has been widely used in recent years. However, its operation lifetime still needs to be improved to meet the requirements for further commercialization. The performance degradation of SOFCs is affected by many factors. It is very important to distinguish these factors and determine the dominant factor(s) for improving the operation lifetime in a more efficient manner. In this paper, the initial operation stage (<100 h) of SOFCs is mainly focused, in which the electrochemical performance changes most significantly. The electrochemical impedance spectroscopy (EIS) was periodically monitored during the operation process. Individual electrode processes of button cells and industrial-size cells were distinguished via distribution of relaxation time (DRT) method and subsequent equivalent circuit model (ECM) fitting. Through detailed time-varying analysis of EIS, the changes of different electrode processes in the initial-stage operation were obtained, and the evolution mechanism of electrochemical performance was proposed. After reduction, SOFCs go through activation stage and aging stage in turn: i) In the activation stage, the anode porosity increases and the gas-phase diffusion process is enhanced, resulting in the improvement of cell performance. ii) In the aging stage, the Ni particles in the anode agglomerate, so the effective three phase boundary (TPB) density decreases, which leads to the degradation of anode charge transfer reaction and the drop of cell performance. This evolution mechanism of electrochemical performance was partially confirmed by detailed microstructure characterization. It should be mentioned that the duration of each stage and the performance change in each stage can be affected by the initial electrode structure. Therefore, in previous studies, it was observed that some cells did not show activation process during initial-stage operation, but directly entered the aging stage. Besides, during longer-term operation of the cell (>100 h), we speculate that the dominant degradation mechanism is the continuous increase of the anode interface reaction-related resistance, which is caused by the agglomeration of Ni particles. However, since the anode structure is gradually stable, the degradation rate of cell performance decreases with respect to the operation time.

Lattice Boltzmann simulation study of anode degradation in solid oxide fuel cells during the initial aging process

Quantifying the performance evolution of solid oxide fuel cells during initial aging process

Simulation study of anode gas and potential distribution of fuel cell based on lattice Boltzmann method

Comparative study on solid oxide fuel cell anode microstructure evolution after long-term operation

Effect of Inhomogeneous Oxidation on the Mechanical Degradation of Anode Supported Solid Oxide Fuel Cell

Influence of Operating Conditions on the Fuel Electrode Degradation of Solid Oxide Electrolysis Cell Investigated by Phase Field Model with Wettability Analysis

Evolution of Electrochemical Characteristics of Solid Oxide Fuel Cells During Initial-Stage Operation

Effects of operating conditions on the performance degradation and anode microstructure evolution of anode-supported solid oxide fuel cells

Fundamental mechanisms limiting solid oxide fuel cell durability

Degradation Analysis of Plasma Sprayed Metal-Supported Solid Oxide Fuel Cell: the Evolution of Electrode Processes under Polarization

Long-term Stability of Metal-Supported Solid Oxide Fuel Cells Employing in Fi Ltrated Electrodes

Lattice Boltzmann Modeling of Carbon Deposition in Porous Anode of a Solid Oxide Fuel Cell with Internal Reforming

Ni migration of Ni-YSZ electrode in solid oxide electrolysis cell: An integrated model study

Modeling of Gas Transport with Electrochemical Reaction in Nickel-Yttria-Stabilized Zirconia Anode During Thermal Cycling by Lattice Boltzmann Method

Microstructure degradation of Ni/CGO anodes for solid oxide fuel cells after long operation time using 3D reconstructions by FIB tomography

Quantitative study on solid oxide fuel cell anode microstructure stability based on 3D microstructure reconstructions

Electrochemical performance study of solid oxide fuel cell using lattice Boltzmann method

Performance Degradation Analysis of Solid Oxide Fuel Cells Using Dynamic Electrochemical Impedance Spectroscopy

Integrated 3D Modeling Unravels the Measures to Mitigate Nickel Migration in Solid Oxide Fuel/Electrolysis Cells

Degradation Mechanisms of Solid Oxide Fuel Cells under Various Thermal Cycling Conditions

Numerical Simulation and Experimental Characterization of the Performance Evolution of A Liquid Antimony Anode Fuel Cell