Abstract:A novel coaxial mixer was proposed, which had an outer wall-scraping frame and a combined inner impeller consisting of a four-pitched-blade turbine paddle (PBT-4) and a Rushton turbine paddle (RT-6). Its heat transfer performance in Newtonian fluid under different operating modes (single rotation of inner impeller, corotation and counter-rotation) was experimentally investigated in a stainless steel agitated vessel with semicircle spiral jacket and ellipsoidal head by measuring the average heat transfer coefficient of the inner wall. Meanwhile, the wall temperature, the heat flow rate and the local heat transfer coefficient in the coaxial agitated vessel were determined with the help of numerical simulation. The results show that the heat transfer coefficient near the inner wall surface of the agitated vessel will increase with the increasing speed of the inner or outer impeller whether under single-shaft agitation or under coaxial agitation mode, whereas the effect of speed of the inner impeller on heat transfer is more obvious and efficient. Under the same conditions, the heat transfer of coaxial agitation is more efficient than that of single-shaft agitation, especially the local heat transfer coefficient on the upper and lower part of the agitated vessel, which is increased greatly. In addition, the local heat transfer coefficient varies with the axial position of the agitated vessel, and the heat transfer coefficient in zones between the upper and lower impeller is relatively high. The effect of the corotation mode and counter-rotation mode on heat transfer is of little difference, but the corotation mode is recommended owing to its advantage of low power consumption and good mixing performance.

Experimental Analysis of the Mass Transfer Coefficient and Interfacial Area in an Aerated Coaxial Mixing System Comprising a Non-Newtonian Solution

Mixing Intensification in a Horizontal Self-Cleaning Twin-Shaft Kneader with a Highly Viscous Newtonian Fluid

Numerical Study on the Synergistic Mechanism of Coaxial Mixers in Dense Solid-Liquid Mixing Systems

Micro-Mixing Enhancement in a Taylor-Couette Reactor Using the Inner Rotors with Various Surface Configurations

Numerical investigation on the intensification of coaxial slurry mixing systems

Numerical Study on Solid Suspension Characteristics of a Coaxial Mixer in Viscous Systems

Experimental Study on Coaxial Mixer Based on Critical Uniform Dispersion of Floating Particles

The Influence of Impeller Combination on the Gas-Liquid Dispersion Performance of a Coaxial Mixer in Viscous Fluids

Power Consumption and Flow Field Characteristics of a Coaxial Mixer with a Double Inner Impeller

Gas Holdup, Bubble Behavior and Mass Transfer in A 5 M High Internal-Loop Airlift Reactor with Non-Newtonian Fluid

Modeling of Mass Transfer Characteristics of Bubble Column Reactor with Surfactant Present

Experimental Research on the Power Consumption of a Coaxial Mixer in a Fluid with High Viscosity

Research on Heat Transfer Performance of Coaxial Mixer with Inner Combined Impeller

CFD simulation on shear-thinning gas-liquid dispersion in coaxial mixer

Experimental and Numerical Study on Flow Resistance and Bubble Transport in a Helical Static Mixer

Experimental study on gas-liquid flow regimes of coaxial mixers equipped with a Rushton/pitched blade turbine and anchor

Experimental Study on Gas–liquid Dispersion and Mass Transfer in Shear-Thinning System with Coaxial Mixer

Mixing performance of a non-Newtonian fluid in a coaxial agitated impeller reactor

Numerical Investigation and Estimating Correlation of Micromixing Performance of Coaxial Mixers

Gas–liquid mixing performance of a non‐Newtonian fluid in a multiple‐impeller agitated tank

Analyzing Local Shear Rate Distribution in a Dual Coaxial Mixing Bioreactor Handling Herschel–Bulkley Biopolymer Solutions through Computational Fluid Dynamics