Abstract:In this paper, Ce-modified Cu-based carbon materials (Cu-Ce/AC) were prepared by impregnation method using walnut shell as the carbon precursor, Cu-ammonia solution as Cu source and Ce as modifier. The catalytic wet air oxidation (CWAO) degradation of phenol wastewater was carried out in a self-assembled fixed-bed reactor. The stability of Cu-Ce/AC catalyst under different pH conditions was studied. This study combines XRD, BET, FT-IR, ICP-OES and XPS characterization techniques to study the main reasons for the deactivation of Cu-Ce/AC catalysts. The reaction mechanism of Cu-Ce/AC catalytic wet air oxidation degradation of phenol was clarified. The result indicates that although phenol was completely converted in the CWAO process, the acidic intermediate product produced were difficult to completely degraded. Therefore, the pH of the solution gradually decreased. In acidic environment, the interaction between active component Cu and carbon carrier is weak, resulting in a large amount of metal leaching into the solution. As a result, the COD conversion gradually decreases. The alkaline environment can effectively slow down the leaching of catalyst Cu while maintaining its high catalytic activity. In addition, the incompletely degraded intermediate products are easy to accumulate and deposit on the Cu-Ce/AC surface, block the micropores and cover the surface-active sites, which reduces the catalyst activity. The study also found that there is a redox cycle between Cu+, Cu2+ Ce3+ and Ce4+ during phenol degradation, which enables Cu and Ce to form a strong interaction. The redox cycle can also promote the formation of oxygen vacancy (h+), O2−·, and HO·, making the degradation of phenol more thorough. At the same time, the mutual conversion between metal lattice oxygen and surface chemisorbed oxygen can generate high concentration of oxygen defect sites, which can improve the oxygen storage capacity of Cu-Ce/AC. These oxygen vacancies also provide more reactive sites to further promote adsorption and catalytic oxidation degradation of phenol and intermediate products.

Tuning the degradation activity and pathways of chlorinated organic pollutants over CeO 2 catalyst with acid sites: synergistic effect of Lewis and Brønsted acid sites

Insight into the Promotional Effect of CE Doped in (feconicrmn)3o4 High Entropy Oxides for Solvent-Free Aerobic Oxidation of Benzyl Alcohol

High-Performance Strategy and Degradation Mechanism of Cezrvox Catalysts for Nox Reduction

Ce-modified USY Zeolite Catalysts for Catalytic Oxidation of Chlorinated VOCs: Effect of the Location of CeO2 and Its Synergistic Effect with USY Zeolite

Mofs-derived CuCeOx Supported on H-zeolite Socony Mobile-5 for Catalytic Oxidation of 1,2-Dichlorobenzene

Boosting Lewis Acidic Sites Via SMSI to Enrich Oxygen Vacancies on Pt–CeO2 Catalysts: Enhancing Efficiency of CO Promoted Toluene Catalysis

Hierarchical Zeolite Enveloping Pd-CeO2 Nanowires: an Efficient Adsorption/catalysis Bifunctional Catalyst for Low Temperature Propane Total Degradation

Synergistic Effect of Pt/Ce and USY Zeolite in Pt-based Catalysts with High Activity for VOCs Degradation

Synergistic Catalytic Effect of (ce,cr)xo2 and HZSM-5 for Elimination of Chlorinated Organic Pollutants

Manipulation of Mn/Ce Ratio for Deep Chlorobenzene Oxidation: Catalytic Mechanisms and Byproducts Analysis

Efficient activation of peroxymonosulfate mediated by Co(II)-CeO2 as a novel heterogeneous catalyst for the degradation of refractory organic contaminants: Degradation pathway, mechanism and toxicity assessment

Mn–Ce Bicenter of a Dual Single-Atom Catalyst Synergistically Triggers Reactive Oxygen Species Generation for Efficient Ozonation of Emerging Contaminants

Transition Metal Doping Effect and High Catalytic Activity of CeO2–TiO2 for Chlorinated VOCs Degradation

Synergistic Performance Between Oxidizability and Acidity/texture Properties for 1,2-Dichloroethane Oxidation over (ce,cr)xo2/zeolite Catalysts

Simultaneous Removal of NOx and VOCs by Si Doping CeO2 Based Catalysts: an Acidity and Redox Properties Balance Strategy

Ce/N @BC prepared based on plant metallurgy strategy: A novel activator of peroxymonosulfate for the degradation of sulfamethoxazole

Enhancement of Mineralization Ability and Water Resistance of Vanadium-Based Catalysts for Catalytic Oxidation of Chlorobenzene by Platinum Loading

Synergistic degradation mechanism of chlorobenzene and NO over the multi-active center catalyst: The role of NO2, Brønsted acidic site, oxygen vacancy

The interplay between selective etching induced cation defects and active oxygen species for volatile organic compounds degradation

Tandem supported Pt and ZSM-5 catalyst with separated catalytic functions for promoting multicomponent VOCs oxidation

Deactivation characteristics of Ce-modified Cu-based carbon materials for catalytic wet air oxidation of phenol wastewater