Abstract:Graphene Hall elements (GHEs) have been demonstrated to be promising magnetic field sensors with excellent sensitivity, linearity, temperature stability, and compatibility with complementary-metal-oxide-semiconductor (CMOS)-integrated circuits (ICs). However, the demonstrated GHEs have still not exhibited a comprehensive advantage in performance over commercial integrated Hall sensors which were implemented in integrated Hall element and CMOS processing ICs. In this work, we develop a technology for the three-dimensional (3D) heterogeneous integration of silicon-based CMOS ICs and GHEs, and the fabricated magnetic field sensors outperform commercial high-end integrated Hall sensors. Specifically, the integrated Hall sensors are implemented in a stacked integration on Si based on a chopper programmable-gain amplifier (CPGA), a chopper-stabilized second-order sigma-delta modulator (CSDM), and graphene-based Hall elements on monochips. GHEs with high sensitivity (up to 1000 A/VT) are fabricated with a compatible process on a smoothened silicon nitride passivation layer of silicon-based CMOS ICs, and the two device layers are connected by an interlayer. The heterogeneous integrated Hall ICs exhibit current and voltage magnetic sensitivities up to 64 000 A/VT and 6.12 V/VT, respectively, which are much higher than those in all other reported nanomaterial-based Hall sensors and even in high-end commercial Hall ICs. Furthermore, the 3D heterogeneous integration technology used here can be extended as a universal technology for integrating nanomaterial-based sensors and Si CMOS ICs.

Volumetric vertical Hall element with integrated coil

Hall element and manufacturing method thereof

A 3-D GaAs-based Hall Sensor Design With Dual Active Layers Structure

Batch-fabricated High-Performance Graphene Hall Elements

Inverted Pyramid 3-axis Silicon Hall Effect Magnetic Sensor With Offset Cancellation

A highly sensitive CMOS digital Hall sensor for low magnetic field applications

Single-Chip Integrated 3-D Hall Sensor

A Fully Integrated Low-Power Hall-Based Isolation Amplifier With IMR Greater Than 120 dB

Ultrasensitive Magnetic Sensors Enabled by Heterogeneous Integration of Graphene Hall Elements and Silicon Processing Circuits.

Physical properties of the Hall current

High Performance Hall Sensors Built on Chemical Vapor Deposition-Grown Bilayer Graphene.

Ultra-Sensitive Graphene Hall Elements

A CMOS Front-End Hall Sensor Microsystem for Linear Magnetic Field Measurement With Best Tradeoff Between Sensitivity and SNR

A New Design of a Single-Device 3D Hall Sensor: Cross-Shaped 3D Hall Sensor

A CMOS Hall sensor modeling with readout circuitry and microcontroller processing for magnetic detection

A New Design of a CMOS Vertical Hall Sensor with a Low Offset

Layer-valley Hall effect under inversion and time-reversal symmetries

High Performance Graphene Hall Sensors

High temperature Hall measurement setup for thin film characterization

Hall mobilities and sheet carrier densities in a single LiNbO$_3$ conductive ferroelectric domain wall

Halbach-Array Magnetic Coil Arrangement on CMOS Chip for Sensitivity Enhancement of Inductive Tactile Sensor