Abstract:Specific capacity, HER, OER, and Overall Water Splitting of Mn0.2Ni0.8Co2O4 electrode and their FE‐SEM images, respectively. Summary Synthesizing triple transition metal oxide (TTMO) is an extraordinary strategy to develop electrodes for efficient energy storage and conversion devices, owing to their unique nanostructure with high porosity and specific surface area. The cobalt‐based mixed‐valence oxides have attracted great attention due to their facile synthesis, low cost, and excellent electrochemical performance. However, less attention is paid to investigating the effect of different substitutions on the physico‐chemical properties of TTMO. In this study, nanoparticles (NPs) decorated ultrathin Ni1‐xMnxCo2O4 nanoflakes (NPs@NFs) are synthesized by tuning the molar ratio between Mn and Ni via facile deep eutectic solvents (DESs) method. Unique and highly porous NPs@NFs nanostructures aid to increase the overall surface area of the materials, whereas Mn, Ni, and Co ions participate in their redox‐active capacity, improving the electrochemical activity of the material. This Ni0.8Mn0.2Co2O4 hybrid nanostructure exhibited excellent supercapacitive performance with a high specific capacity (Cs) of 761 mAh g−1 at a higher current density of 30 mA cm−2 and superior cycling retention of 92.86% after 10 000 cycles. Further, a hybrid asymmetric supercapacitor (Ni0.8Mn0.2Co2O4//AC) device exhibited an extended potential window of 1.5 V, which results in an ultrahigh energy density of 66.2 W kg−1 by sustaining a power density of 1519 Wh kg−1. The electrocatalytic activity of the optimized Ni0.8Mn0.2Co2O4 shows the outstanding performance toward hydrogen evolution reaction (HER) (150 mV/ 161 mV dec−1) and oxygen evolution reaction (OER) (123 mV/47 mV dec−1) with a lower voltage of 1.51 V (@10 mA cm−2) for overall water splitting, with outstanding stability up to 25 hours. These results indicate that chemically synthesized ultrathin NPs@NFs‐like nanostructure is a capable electrode for multiple applications, such as supercapacitors, and overall water splitting. Highlights Facial synthesis of nanoflakes of Ni1‐XMnXCo2O4 thin films by a DES method. Fully decorated NPs on the interconnected NFs provided a higher surface area. Nanostructures with a maximum specific capacity of 761 mAh g−1 at 30 mA cm−2, with excellent stability of 92.86%. The solid‐state device shows an excellent energy density of 66.2 Wh kg−1 at a power density of 1519 W kg−1. The assembled Ni0.8Mn0.2Co2O4 /Ni‐based water splitting exhibited low voltage (1.51 V) and superb stability up to 25 hours.

Hydrothermal synthesized nickel tungstate (NiWO 4 ) microflowers for supercapacitor and water-splitting

Exploring the effect of concentration on hydrothermally synthesized mesoporous spherical nanoflowers of bismuth tungstate for hybrid supercapacitor and water-splitting applications

Bifunctional nanoparticles decorated Ni1‐xMnxCo2O4 ultrathin nanoflakes‐like electrodes for supercapacitor and overall water splitting

Facilely synthesized porous NiCo2O4 flowerlike nanostructure for high-rate supercapacitors

Ultrahigh-performance NiWO 4 nanoparticles anchored ZnO nanoflakes as a potential electrode for energy storage applications

Exploration of facile hydrothermally produced pure nickel oxide nanostructures as an effective electrode material for the enhanced supercapacitor applications

Engineering of nickel‐cobalt oxide nanostructures based on biomass material for high performance supercapacitor and catalytic water splitting

Asymmetric supercapacitor performance of hydrothermally-synthesized MWCNT-WO 3 composite electrode

Sodium Dodecyl Sulfate-Assisted Synthesis of Flower-Like NiCo2O4 Microspheres with Large Specific Surface Area for Supercapacitors

H2O2-assisted microwave synthesis of NiO/CNT nanocomposite material for supercapacitor applications

Facile synthesis of efficient construction of tungsten disulfide/iron cobaltite nanocomposite grown on nickel foam as a battery-type energy material for electrochemical supercapacitors with superior performance

High Voltage Asymmetric Supercapacitors Using Tungsten‐Doped Mn‐Co Spinel Ferrite Electrodes

Polygonal-like structure WO3 by hydrothermal route: high performance and ultra-stable for supercapacitor applications

Theoretical and experimental study of flower-like NiMoS/NiO/NF with interface layer as a novel highly efficient bifunctional-electrode toward supercapacitor and HER

Hydrothermally Synthesised NiCoP Nanostructures and Electrospun N-doped Carbon Nanofiber As Multifunctional Potential Electrode for Hybrid Water Electrolyser and Supercapatteries

An NH4F-assisted chemical bath synthesis of NiCo2O4 nanoforms onto stainless-steel substrate as supercapacitor electrode

Topochemically prepared tungsten disulfide nanostructures as a novel pseudocapacitive electrode for high performance supercapacitor

Synthesis of Co–Ni Oxides @ CNTs Nanoflowers and Their Electrochemical Performance in Supercapacitors

Hydrothermal assisted synthesis of hierarchical SnO 2 micro flowers with CdO nanoparticles based membrane for energy storage applications

Regulation preferred crystal plane and oxygen vacancy of CoWO4 with morphology remolding to boost electrochemical performances for battery-supercapacitor hybrid device electrode

Single-step, in-situ fabrication of flower-like NiCuMn hybrid oxyhydroxide electrodes for enhanced supercapacitor performance