Strong Seismic Response of Pile Group-soil Coupling System in Liquefied Ground
Hao TANG,Xiu-feng SHI,Liang TANG,De-gou CAI,Xian-zhang LING,Dong-yang WANG
DOI: https://doi.org/10.3969/j.issn.1000-0844.2016.06.0869
IF: 1.843
2016-01-01
Advances in Civil Engineering
Abstract:A three-dimensional finite element model was established for a shaking table test of dynamic pile group-soil interaction.Governing equations of u-p formulation were used to describe the dynamic properties of saturated sand.We choose a plastic multi-yield surface constitutive model to describe the dynamic properties of saturated sand,and a nonlinear beam-column element was used to simulate the pile in this model.The results of the test verify the validity and effec-tiveness of the numerical model.In an experiment using a 2 ×2 pile group,a three-dimensional nonlinear finite element model of soil-pile-bridge structure interaction was established.Based on this 2×2 pile group model,with a 2 piles in row pile group model (2PR)and a 2 piles in parallel pile group model (2PP),a 3 ×3 pile group model (with a 3PR pile group model and a 3PP pile group model)have been expended.Based on different configurations of pile group foundations,an analysis of soil-pile group interaction in liquefied ground was made.When using the same number of piles and a pile array direction parallel to the direction of seismic wave,stress is reduced by 5%~10%.However,there are few obvious effects on site liquefaction conditions.Under the same parallel array of piles,in comparison to the two-pile model,the three-pile model ground-liquefaction time results in delays of 5 s,and pile bending moment and shear force decreases 33%~38%.With an increase in the number of piles,the ground-liquefaction time is delayed,and the stress of pile body decreases.The results of this study will be of significant use for bridge engineeringdesign.