Co-gasification of biomass and polyethylene: a simulation study by considering tar formation
Ye Tian,Zhiyuan Luo,Dong He,Yu Yang,Shimang Liang,Wentao Liu,Liang Yuan
DOI: https://doi.org/10.1007/s13399-022-02848-9
IF: 4.05
2022-05-31
Biomass Conversion and Biorefinery
Abstract:AbstractEnergy recovery from biomass gasification has attracted increasing attention. However, carbon content in biomass is low relative to plastics and fossil fuels, causing a significant reduction in the calorific value of the produced syngas. The addition of a high-carbon fuel (e.g., coal and polyethylene) to biomass can improve the quality of the syngas. In this study, a comprehensive process model was developed for co-gasification of rice husk (RH) and polyethylene (PE) using Aspen Plus simulator under steady-state condition. The model is first validated by comparing with experimental data collected from a fluidized bed co-gasification system. Subsequently, the effects of gasification temperature, steam-to-fuel ratio (STF) and PE ratio (PR) on the produced gas composition, syngas yield, producer gas caloric value, tar content in the producer gas, H2/CO, H2 yield and gasification efficiencies are studied. The results showed that, increasing PR could improve the gas yield, H2/CO and the higher heating value (HHV) of the syngas. Higher PR also enhanced the production of H2 and tar conversion. However, as STF increased, the HHV of the syngas, and gasification performance reduced. Higher temperature was beneficial for H2 production, tar conversion, and gas yield, but reduced H2/CO.
energy & fuels,engineering, chemical