Abstract:Compared with the traditional non-cutting measurement, machining tests can more accurately reflect the kinematic errors of five-axis machine tools in the actual machining process for the users. However, measurement and calculation of the machining tests in the literature are quite difficult and time-consuming. A new method of the machining tests for the trunnion axis of five-axis machine tool is proposed. Firstly, a simple mathematical model of the cradle-type five-axis machine tool was established by optimizing the coordinate system settings based on robot kinematics. Then, the machining tests based on error-sensitive directions were proposed to identify the kinematic errors of the trunnion axis of cradle-type five-axis machine tool. By adopting the error-sensitive vectors in the matrix calculation, the functional relationship equations between the machining errors of the test piece in the error-sensitive directions and the kinematic errors of C-axis and A-axis of five-axis machine tool rotary table was established based on the model of the kinematic errors. According to our previous work, the kinematic errors of C-axis can be treated as the known quantities, and the kinematic errors of A-axis can be obtained from the equations. This method was tested in Mikron UCP600 vertical machining center. The machining errors in the error-sensitive directions can be obtained by CMM inspection from the finished test piece to identify the kinematic errors of five-axis machine tool trunnion axis. Experimental results demonstrated that the proposed method can reduce the complexity, cost, and the time consumed substantially, and has a wider applicability. This paper proposes a new method of the machining tests for the trunnion axis of five-axis machine tool.

Research on spindle fault diagnosis technology of six- axis five-linkage Bridge CNC machine tool

Research on Fault Diagnosis Technology of CNC Machine Tool Based on Machining Surface Roughness

Research on the Error Measurement and Error Compensation Technology for CNC Machine Tools

Reliability analysis of spindle system of CNC grinder based on fault data

Fault monitoring and diagnosis of motorized spindle in five-axis Machining Center based on CNN-SVM-PSO

Research on Remote Intelligent Fault Diagnosis of CNC Machine Tools and Realization of its Software

Research on Mechanical Fault Diagnosis Method of CNC Machine Tools

Digital twin-driven fault diagnosis for CNC machine tool

Identification of Kinematic Errors of Five-Axis Machine Tool Trunnion Axis from Finished Test Piece

A Review of Key Technologies for High-Speed Motorized Spindles of CNC Machine Tools

Research on Fault Diagnosis Method of Bearings in the Spindle System for CNC Machine Tools Based on DRSN-Transformer

Fault diagnosis of high-speed motorized spindles based on lumped parameter model and enhanced transfer learning

Application of the Finite Element Method for Analyzing the Vibration Characteristics of a Spindle System and Fault Diagnosis

A Physics-based Model-data-driven Method for Spindle Health Diagnosis, Part I: Modeling of Geometric Faults

Thermal-structure Characteristics Coupling Analysis and Optimisation for Horizontal CNC Machining Centre Spindle

Geometric Error Contribution Modeling and Sensitivity Evaluating for Each Axis of Five-Axis Machine Tools Based on POE Theory and Transforming Differential Changes Between Coordinate Frames

Fault diagnosis technology of CNC electromechanical system in mechanical engineering equipment manufacturing under structural coupling

The Research Status and Development Trend of Fault Diagnosis System for CNC Machine

Dynamic Measurement of Spindle Errors of CNC Machine Tools by Capacitive Sensors During Aircraft Parts Machining

Diagnosis of High-Speed Ball-Bearing Spindles by Data Mining of Dynamic Responses from Various Rotating Elements

Fault propagation analysis of computer numerically controlled machine tools