Abstract:FeS2 as a sodium-ion battery anode material has attracted great attention on account of its high theoretical capacity, abundance, low cost, and other advantages. However, the poor electrical conductivity of FeS2 and the huge volume expansion in the sodium-ion insertion/extraction process are the key factors affecting its electrochemical performance. Herein, NaCl was used as a template to successfully synthesize a composite material of a nitrogen-doped porous carbon framework loaded with ultrafine FeS2 nanoparticles (FeS2/NPCF). The three-dimensional porous carbon framework improves the conductivity of the material as well as effectively suppresses the volume expansion of the material during the charge and discharge process, thus improving the cycle performance of the composite material. In the three-dimensional porous carbon framework with a larger specific surface area, ultrafine FeS2 particles can lessen the diffusion distance and enhance the Na+ diffusion rate. The ultrafine FeS2 nanoparticles loaded on the nitrogen-doped highly conductive porous carbon framework reduce the e-transport resistance and limit the volume change of FeS2 during the cycle, which improves the structure's stability. These advantages make FeS2/NPCF an ideal anode electrode material of a sodium-ion battery that shows excellent sodium storage performance. A reversible capacity of 552 mAh g–1 is maintained with a capacity retention of 87% at 0.5A g–1 after 100 cycles. Remarkably, even at 5A g–1, the FeS2/NPCF electrode still delivers a discharge capacity of 430 mAh g–1after 500 cycles. FeS2/NPCF, with its excellent electrochemical performance, is considered a potential anode material for sodium-ion batteries.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.1c00967?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.1c00967</a>.SEM, TEM, HRTEM, and elemental mapping images of FeS2/NC; XPS spectra of FeS2/NPCF and FeS2/NC; CV curves of FeS2/NC; cycling performance of FeS2/NPCF; SEM and XRD patterns of the PCF; cycling performance of the PCF; Nyquist plots of FeS2/NPCF and FeS2/NC; and fitted circuit diagram and resistance value (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.1c00967/suppl_file/ae1c00967_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Waste cotton fiber-based graphitized carbon/Fe7S8 composites derived from sulfurization of pyrolyzate Fe-Fe3C intermediates as anodes for high-performance sodium-ion batteries

Fe1-xS/C nanocomposites from sugarcane waste-derived microporous carbon for high-performance lithium ion batteries

Electrode Materials: A Hierarchical N/S-Codoped Carbon Anode Fabricated Facilely from Cellulose/Polyaniline Microspheres for High-Performance Sodium-Ion Batteries (Adv. Energy Mater. 6/2016)

Enhanced High-Rate Capability and Long Cycle Stability of FeS@NCG Nanofibers for Sodium-Ion Battery Anodes.

Synthesis of FeS-impregnated heteroatom-doped carbon nanofibers assisted by one-step vulcanization for superior sodium storage

In-situ synthesis of FeS/N, S co-doped carbon composite with electrolyte-electrode synergy for rapid sodium storage

MoS2/cotton-derived Carbon Fibers with Enhanced Cyclic Performance for Sodium-Ion Batteries

MOF‐Derived Fe 7 S 8 Nanoparticles/N‐Doped Carbon Nanofibers as an Ultra‐Stable Anode for Sodium‐Ion Batteries

Ultrafine Sb2S3@carbon-nanofibers for fast and stable sodium storage

Self-standing Na-storage anode of Fe2O3 nanodots encapsulated in porous N-doped carbon nanofibers with ultra-high cyclic stability

Nitrogen-Doped Porous Carbon Framework Supports Ultrafine FeS2 Nanoparticles As Advanced Performance Anode Materials for Sodium-Ion Batteries

The morphology and electrochemical properties of porous Fe2O3@C and FeS@C nanofibers as stable and high-capacity anodes for lithium and sodium storage

FeS2 Nanoparticles Embedded in N/S Co-Doped Porous Carbon Fibers As Anode for Sodium-Ion Batteries

The Novel N-rich Hard Carbon Nanofiber As High-Performance Electrode Materials for Sodium-Ion Batteries

In Situ Growth of Iron Sulfide on Fast Charge Transfer V2C‐MXene for Superior Sodium Storage Anodes

A Scalable Approach to Na 2 FeP 2 O 7 @Carbon/Expanded Graphite as a Low‐Cost and High‐Performance Cathode for Sodium‐Ion Batteries

Microstructured Sulfur-Doped Carbon-Coated Fe 7 S 8 Composite for High-Performance Lithium and Sodium Storage

Electrospun Sb/C Fibers for a Stable and Fast Sodium-Ion Battery Anode.

Electrospun Na4Fe3(PO4)2(P2O7) nanofibers as free-standing cathodes for ultralong-life and high-rate sodium-ion batteries

A Scalable Approach to Na4Fe3(PO4)2P2O7@carbon/expanded Graphite As Cathode for Ultralong-Lifespan and Low-Temperature Sodium-Ion Batteries

Nitrogen-Doped Porous Carbon Framework Supports Ultrafine FeS 2 Nanoparticles as Advanced Performance Anode Materials for Sodium-Ion Batteries