Abstract:Microwave continuous-flow heating has been proven to reduce the time of chemical reaction, increase the conversion rate, and improve product purity effectively. However, there are still problems such as relatively low heating efficiency, unideal heating homogeneity, and poor compactness, which brings further drawbacks like difficulty in fabrication and integration. In this study, a compact microwave continuous-flow heater based on six fractal antennas is proposed to address the problems above. First, a multi-physics simulation model is built, while heating efficiency and the volumetric coefficient of variance (COV) are improved through adjusting the geometric structure of this heater and the phase assignment of each radiator. Second, an experiment is conducted to verify the simulation model, which is consistent with the simulation. Third, a method of fast varying phases to achieve greater heating efficiency and heating homogeneity is adopted. The results show that the single-phase radiator improved efficiency by 31.1%, and COV was significantly optimized, reaching 64%. Furthermore, 0–100% ethanol–water solutions are processed by the heater, demonstrating its strong adaptability of vastly changing relative permittivity of liquid load. Moreover, an advance of this microwave continuous-flow heater is observed, compared with conventional multi-mode resonant cavity. Last, the performance of this microwave continuous-flow heater as the chemical reactor for biodiesel production is simulated. This design enables massive chemical production in fields like food industry and biodiesel production, with enhanced compactness, heating efficiency, and heating homogeneity.

Effect of Microwave Heating on the Mixing Effect of Chlorinated Cerium Solution and the Preparation of Cerium Oxide

Heat Transfer in a Novel Microwave Heating Device Coupled with Atomization Feeding

Treatment of Blast Furnace Gas Washing Water by Utilization of Coagulation Associated with Microwave

Multi-physical field analysis based on a multi-material mode stirrer and interlayer for microwave processing fluid

Investigating the Effect of Microwave Induction on the Polymerization Rate of Polycarboxylate Superplasticizers

Fully coupled electromagnetic-thermal-mechanical comparative simulation of direct vs hybrid microwave sintering of 3Y-ZrO 2

Multiphysics Analysis for Unusual Heat Convection in Microwave Heating Liquid

Experimental and numerical studies on the heating mechanism of millimeter multi-particle system under microwave irradiation

Promotional Effect of Microwave Radiation Treatment on the Desorption of CO2 from Mono-Ethanolamine (MEA) Solution over FeOOH Catalyst

Molecular dynamics simulation on temperature and structure characteristics of microwave-heating NaCl solution

Influence of microwave activation on pore structure and dechlorination porformance of Ca(OH)_2

Comparative Studies on the Dissolution of Ceramic UO2 Pellets in Nitric Acid by Microwave and Conventional Heating

Heating Behavior And Crystal Growth Mechanism In Microwave Field

Imaging of liquid temperature distribution during microwave heating via thermochromic metal organic frameworks

Promotional effect of microwave radiation treatment on the desorption of CO 2 from mono-ethanolamine (MEA) solution over FeOOH catalyst

Effect of Microwave-Assisted Heating on Chalcopyrite Leaching of Kinetics, Interface Temperature and Surface Energy

Multi-Physical Simulation of Stirring Effect on Heating Uniformity in a Microwave Reactor With an Interlayer

Resonance-Driven Microwave Heating of Low-Loss Cylindrical Substances in Waveguide Systems

Mechanism analysis using multi-physical field coupling: Silicon carbide-assisted microwave heating of UMT-coated soil

Numerical and Experimental Study on Effect of Process Parameters on Preparation of A356 Aluminum Alloy Semi-Solid Slurry by Electromagnetic Stirring

Compact Microwave Continuous-Flow Heater