Analysis the Thermal Field for the Liquid Floated Gyroscope and It's Simulation
Zhengjun Wang,Jianzhong Yang,Yiyong Yang,Zheng You,Feifan Chen
DOI: https://doi.org/10.4028/www.scientific.net/amm.541-542.1382
2014-01-01
Applied Mechanics and Materials
Abstract:In this paper, it is put forward a new kind of gyroscope and Theoretical analysis and simulation for it. it is based on the latest proposed a kind of MEMS gyroscope, the micro machine rotor of the liquid floated gyroscope in the thermal field has carried on the stress analysis and simulation. The magnetic field is a kind of drive, Gyroscope lumen is composed of stator and detecting electrode plates,it is filled with 2 # industrial white oil in the inner cavity body,2 # industrial white oil support this gyroscope of rotor . The measuring accuracy of the rotor is very high, and the rotor's drift stability is also greatly improved. But the rotor is governed by thermal field, it is still mentioned the main reason for the precision. For the generation of thermal field mainly comes from two parts: heat field and eddy heat. Comsol software is presented in this paper, the thermal field of the rotor were analyzed, and the current in the magnetic field to join 280 mA, 580 mA, 780 mA and 1800 mA, the temperature distribution for the magnetic field, the rotor's blow plate of temperature is less than the up plate of temperature; The rotor side wall is the highest temperature and its the lining is greater than the outer wall temperature; Around the rotor 2 # industrial white oil to join as the speed of 2500 rmp, 3500 rmp, 5500 rmp, 8000 rmp, because of the large flow rate, the eddy current is big, so the temperature increased. Two physical field coupling together to produce energy losses, affect the material performance, at the same time bring local vibration,this phenomenon results in the decrease of accuracy of measurement. Therefore, we need to change the rotor structure and materials to reduce the influence on measurement accuracy. At the same time for the next step, the stress analysis of rotor under the confined space for experiment platform test provide simulation data and the theoretical analysis.The sidewalls of the rotor machining into the radian of 0.05 mm.